Abstract:Uniaxial tensile testing explored the Portevin–Le Chatelier (PLC) effect in nickel-based superalloys featuring high Mo/Cr mass ratios, focusing on the influence of variations in the initial microstructure on the deformation behavior at room and elevated temperatures. Experimental results indicated that the PLC effect was observed solely in the high-temperature tensile curves. However, the deformation mechanisms and characteristics of the PLC effect varied with different initial microstructures. Solid solution (SS) and over-aged (OA) samples exhibited C-type serrations, while under-aged (UA) and peak-aged (PA) specimens, featuring short- and long-range ordered phases, respectively, exhibited A + B type serrations in their tensile curves. Microstructural evolution from the SS to the UA, PA and OA states changed their stacking fault energy (SFE), leading to a sequential transformation in the plastic deformation mechanisms during high-temperature tensile deformation: stacking fault (SF) → nanotwin → microtwin → SF. C-type serrations in the SS samples were associated with high solute-atom contents and SF formation. The PLC effects in the UA and PA samples were predominantly caused by solute atom pinning dislocations. Although precipitates and twins were not the primary drivers of the PLC effect, they impeded dislocation migration, exacerbated solute-atom segregation and enhanced dislocation pinning, generating A + B-shaped serrations. In the OA specimens, precipitated phases induced interfacial mismatch under thermal-force coupling. SF shearing of the precipitated phase and subsequent re-dissolution facilitated the formation of C-type serrations, whose PLC effect was induced by the combined action of dynamic strain aging (DSA), SFs of the matrix and diffusion-controlled pseudo-locking mechanisms.

Portevin-Le Châtelier Effect in Wrought Ni-based Superalloys: Experiments and Mechanisms

Portevin-Le Châtelier Effect in a Wrought Ni–Co Based Superalloy

The Dependence of Portevin–Le Châtelier Effect on the Γ′ Precipitates in a Wrought Ni-Base Superalloy

The Portevin-Le Chatelier Effect in Al-Mg Alloy Investigated by Infrared Pyrometry

EFFECT OF PRECIPITATE ON PLC EFFECT IN 2024 Al ALLoY

Portevin-Le Châtelier Effect in a Powder Metallurgy Co-Ni-Based Superalloy

The influence of additive manufacturing on Portevin-Le Châtelier (PLC) effect in Ni-Co-based superalloy

Influence of γʹ precipitates on Portevin–Le Chatelier effect of NI-based superalloys

INVESTIGATION OF TEMPERATURE DEPENDENCE OF PLC EFFECT IN A NICKEL BASE SUPERALLOY

Influences of Initial Microstructures on Portevin-Le Chatelier Effect and Mechanical Properties of a Ni-Fe-Cr-Base Superalloy

A Critical Review on the Portevin-Le Chatelier Effect in Aluminum Alloys

Portevin–Le Chatelier (PLC) Effect Induced by Different Deformation Mechanisms in Ni–25Mo–8Cr Alloy During High-Temperature Tensile Deformation

Multiscale Analysis And Numerical Modeling Of The Portevin-Le Chatelier Effect

Explanation of the PLC Effect in Advanced High-Strength Medium-Mn Steels. A Review

Experimental investigation of a Portevin-Le Chatelier band in Ni-Co-based superalloys in relation to ' precipitates at 500 C

The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting

Investigation on Portevin-Le Chatelier Effect in a Ni-Co Based Superalloy Base on Digital Speckle Correlation

Influence of Microtwins on Portevin-Le Châtelier Effect of a Ni-Co Based Disk Superalloy

The Nonlinear Analysis of Portevin-Le Chatelier (PLC) Effect: an Application to Medium-Mn Steel

Dynamics of Portevin-Le Chatelier (PLC) Bands and Fracture Behavior of W-tempered 7075 Aluminum Alloys with Different Cooling Methods

Influence of Γ′ Precipitates on the Critical Strain and Localized Deformation of Serrated Flow in Ni-based Superalloys