Abstract:Bubble aeration has been widely applied in water/wastewater treatment, however its low gas utilization rate results in high energy consumption. Application of micro-nanobubbles (MNB) has emerged as a process with the potential to significantly increase gas utilisation due to their high relative surface area and high gas-liquid mass transfer efficiency. In this study, we demonstrate through calibrated models that MNB of an optimum bubble size can shrink and burst at or below the water surface enabling (1) all encapsulated gas to thoroughly dissolve in water, and (2) the bursting of nanobubbles to potentially generate free radicals. Through the understanding of MNB dimensional characteristics and bubble behaviour in water, a dynamic model that integrated force balance (i.e. buoyancy force, gravity, drag force, Basset force and virtual mass force), and mass transfer was developed to describe the rising velocity and radius variation of MNB along its upward trajectory. Unlike for conventional millimetre-sized bubbles, intensive gas dissolution of MNBs led to radius reduction for small bubbles, while a large initial radius triggers bubble swelling. The initial water depth was also crucial, where greater depth could drive the potential for bubble shrinkage so that they were more liable to contract. For example, the optimum bubble size of air (42–194 μm) and oxygen (127–470 μm) MNB that could achieve complete gas transfer (100% gas utilisation) for a range of specific water depths (0.5–10 m) were calculated. The modelling results for microbubbles (10–530 μm) were well validated by the experimental data (R 2 >0.85). However, the validation of the modelling results for nanobubble (<1 μm) aeration requires further study due to a lack of available empirical data. In this study, the proposed model and analysis provided new insights into understanding bubble dynamics in water and offered fundamental guidance for practitioners looking to upgrade bubble aeration system.

Development of optical observation system for micro-nano bubbles

Effect of Pore Size Distribution and Colloidal Fines of Porous Media on the Transport Behavior of Micro-Nano-bubbles

Subsurface transport behavior of micro-nano bubbles and potential applications for groundwater remediation.

Characteristics of micro-nano bubbles and potential application in groundwater bioremediation.

Measuring formation of a vapor bubble around a heated nanoparticle and size of nanoparticles by holography

558 A study on numerical bubble-interaction model in micro-bubbly flows

Single-Digit Nanobubble Sensing via Nanopore Technology

Preparation and Characterization of Microbubbles with a Porous Ceramic Membrane

Bubbling Behaviors Induced by Gas-Liquid Mixture Permeating Through A Porous Medium

Application research of micro and nano bubbles in water pollution control

Flow Patterns and Parameters of Micro Bubble Generation in a Flow Focusing Device

Underwater microbubbles detection and identification based on dark field imaging

Development of a New Microbubble System and Its Performance

Micro and nano-sized bubbles for sanitation and water reuse: from fundamentals to application

Ultrasound-modulated Laser Optical Feedback Imaging System with Microbubbles

Recent advances in bubble-based technologies: Underlying interaction mechanisms and applications

A modelling approach to explore the optimum bubble size for micro-nanobubble aeration

Development of microbubble generation method

Theoretical model for micro-nano-bubbles mass transfer during contaminant treatment

In situ characterisation of size distribution and rise velocity of microbubbles by high-speed photography

Quasi-droplet Microbubbles for High Resolution Sensing Applications