Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Bending Performance of Low Shrinkage Engineered Cementitious Composites-Concrete Composite Beam:Simulation and Validation

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Cohesive Cracking Simulation of Concrete Using Effective Modulus

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Flexural Performance of High Strength Engineered Cementitious Composite-Steel Beam Coupling with Shrinkage Load

Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams

Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics model

Flexural Performance of Layered ECC-concrete Composite Beam

Bending Performance of Lightweight Aggregate Concrete-filled Steel Tube Composite Beam

Experimental Investigation and Analysis on Flexural Performance of Functionally Graded Composite Beam Crack-Controlled by Ultrahigh Toughness Cementitious Composites

Experimental study on seismic performance of precast LSECC/RC composite joints with U-shaped LSECC beam shells

Experimental investigation on seismic performance of plain engineered cementitious composite beams

Experimental investigation on flexural performance of concrete beams strengthened with SMA-GFRP-ECC smart composite materials

Theoretical analysis of flexural performance of plain concrete composite beams strengthened with ultrahigh toughness cementitious composite

Experimental and Numerical Study of Curved SFRC and ECC composite beams with Various Connectors

Improvement of the flexural and cracking behavior of RC beams using ultra-high toughness cementitious composites(I):theoretical analysis

A Comprehensive Study on the Effect of Reinforcing Methods on the Flexural Behaviour of Concrete-RUHTCC Composite Beams

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Flexural Behavior of Steel-Mpc Based High Performance Concrete Composite Beams Subjected to Hogging Moments

Flexural Behaviors of Rc Beams Strengthened with Post-Poured Uhtcc Layer

Simulation and test of flexural performance of polyvinyl alcohol-steel hybrid fiber reinforced cementitious composite