Abstract:In this contribution, selected fundamental properties of concrete are presented and discussed. Basic mechanisms of shrinkage are first described in some detail. With increasing age of concrete different mechanisms of shrinkage become activated. During the first few hours after mixing, dissolution of cement is the main shrinkage mechanism. Depending on the humidity of the surrounding air, capillary pressure in the pore water may cause serious damage in the first few hours. After this initial loss of water, the remaining aqueous solution is retreated in the pores between fine aggregates and first hydration products. At this scale, the role of disjoining pressure is pointed out in detail and it becomes clear that the influence of capillary pressure on shrinkage of hardened concrete can be neglected. Additionally, at relative humidity lower than 50%, the dominating mechanism is the increasing surface energy of the drying gel particles. Shrinkage of high-strength concrete has a totally different time evolution. The moisture distribution n aging high-strength concrete is completely different. If high-strength concrete is exposed to an environment with RH higher than 80%, there will be no shrinkage at all but swelling. These fundamental aspects of shrinkage have to be taken into consideration when long-term shrinkage is to be predicted. Creep of concrete can be described in a realistic way by means of rate theory. Elements of rate theory are briefly described. The influence of temperature and applied stress is outlined. Most important, however, is the influence of humidity content. As the humidity content of high-strength concrete is comparatively low, creep is significantly reduced as compared to normal concrete. Prediction of creep can be significantly improved if these fundamentals are taken into consideration.

STUDY OF THE CREEP BEHAVIOR OF HIGH STRENGTH SELF-COMPACTING CONCRETE

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Influence of Superplasticiser on Early Shrinkage and Total Shrinkage of Concrete

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Experimental Study on Cracking Property of Self-Compacting Concrete

Effects of shrinkage reducing admixture and internal curing agent on shrinkage and creep of high performance concrete

Creep Model of High-Performance Concrete at Different Loading Ages

Measurement and Modeling of Creep Property of High-Strength Concrete Considering Stress Relaxation Effect

Decoupling of Autogenous Shrinkage and Tensile Creep Strain in High Strength Concrete at Early Ages

Influence of Superplasticizer and Shrinkage-Reducing Admixtures on Early Age Shrinkage of Concrete

Influence of Early-age Curing Time on Shrinkage of Concrete

Influence of Shrinkage Retarder on Early Self-Shrinking of Concrete

Experimental study on fracture properties of self-compacting concrete

Methodology of Obtaining Intrinsic Creep Property of Concrete by Flexural Deflection Test

Analytical Prediction and Experimental Research on Shrinkage Cracking of Restrained Early-Age Concrete

Design and Control Shrinkage Behavior of High-Strength Self-Consolidating Concrete Using Shrinkage-Reducing Admixture and Super-Absorbent Polymer

Comparison of Compressive, Tensile, and Flexural Creep of Early-Age Concretes under Sealed and Drying Conditions

Fundamental aspects of the interaction between hardened cement paste and water applied to improve prediction of shrinkage and creep of concrete: A Critical Review

Numerical Simulation of High-Strength Concrete Creep under Cyclic Load

Early-age autogenous shrinkage and tensile creep of concrete reinforced with polypropylene macro fiber

Experiments on drying shrinkage and creep of high performance hybrid-fiber-reinforced concrete