Experimental study on seismic behavior of steel beam to wide-flange specially-shaped composite column connections

MA Rongquan,BAN Huiyong,ZHAO Yuzheng,WANG Yuanqing,LI Qiang,LIU Ming

DOI: https://doi.org/10.14006/j.jzjgxb.2017.06.012

2017-01-01

Abstract:To investigate the seismic behavior of flange strengthened connections used in high-rise steel frame structures with specially-shaped columns,two full-scale connections with different configurations were designed,including one with a lattice wide-flange specially-shaped composite column,and the other with a solid composite column.Cyclic loading tests were undertaken to examine the failure modes,hysteretic behavior,ultimate capacities,beam end rotation,ductility,and energy dissipation of the two connections.The test results indicate that both the connections fail due to cracking within the beam flange adjacent to the end of the strengthening plates.Moment resistance of the specimens reaches 1.10-1.13 times of the full plastic moment capacity.The beam rotation resulted from flexure is the main component of beam-end rotation,whilst the panel zone rotation contributes only 1.0％-1.8％,and the column rotation contributes 9.2％-13.0％.Displacement ductility coefficient of the specimens is about 2.33-2.38 and the equivalent viscous damping coefficient is about 0.264-0.267.In addition,it is found that the ultimate capacities of the two connections are essentially equal,while other seismic performance of the connection with lattice wide-flange specially-shaped composite column is relatively better than the connection with solid composite column.Generally,the ductility and energy dissipation of this new type of connections are a bit lower compared with conventional beam-to-column with flange-strengthened connections reported previously.