Abstract:Linker-free magnetite nanoparticles (Fe3O4NPs)-decorated gold nanoparticles (AuNPs) were grown using a new protocol that can be used as a new platform for synthesis of other intact metal–metal oxide nanocomposites without the need for linkers. This minimizes the distance between the metal and metal oxide nanoparticles and ensures the optimum combined effects between the two material interfaces. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the Fe3O4-Au nanocomposite, without any change in the magnetite phase. Characterization, using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, revealed the composite to consist of AuNPs of 70 ± 10 nm diameter decorated with tiny 10 ± 3 nm diameter Fe3O4NPs in Au:Fe mass ratio of 5:1. The prepared Fe3O4-Au nanocomposite was embedded in ionic liquid (IL) and applied for the modification of glassy carbon electrode (GCE) for the electrochemical detection of As(III) in water. By combining the excellent catalytic properties of the AuNPs with the high adsorption capacity of the tiny Fe3O4NPs towards As(III), as well as the good conductivity of IL, the Fe3O4-Au-IL nanocomposite showed excellent performance in the square wave anodic stripping voltammetry detection of As(III). Under the optimized conditions, a linear range of 1 to 100 μg/L was achieved with a detection limit of 0.22 μg/L (S/N = 3), and no interference from 100-fold higher concentrations of a wide variety of cations and anions found in water. A very low residual standard deviation of 1.16% confirmed the high precision/reproducibility of As(III) analysis and the reliability of the Fe3O4-Au-IL sensing interface. Finally, this proposed sensing interface was successfully applied to analyzing synthetic river and wastewater samples with a 95–101% recovery, demonstrating excellent accuracy, even in complex synthetic river and wastewater samples containing high concentrations of humic acid without any sample pretreatments.

A novel and sensitive electrochemical sensor based on nanoporous gold for determination of As(III)

Novel Electrochemical Sensing Platform Based on Ion Imprinted Polymer with Nanoporous Gold for Ultrasensitive and Selective Determination of As3+

Nanoporous Gold Microelectrode for Electrochemical Sensing of As(III) in Cellular Environment

Glassy Carbon Electrode Modified with Citrate Stabilized Gold Nanoparticles for Sensitive Arsenic (III) Detection

Adsorbent Assisted in Situ Electrocatalysis: an Ultra-Sensitive Detection of As(III) in Water at Fe3O4 Nanosphere Densely Decorated with Au Nanoparticles.

In-situ Synthesis of ZnO Onto Nanoporous Gold Microelectrode for the Electrochemical Sensing of Arsenic(iii) in Near-Neutral Conditions

Paper-based Gold Nanoparticles Decorated SWCNTs Chemiresistive Sensor for Sensitive Detection of As(III) Based on Electrochemical Doping.

In Situ Deposition of Gold Nanoparticles and L-Cysteine on Screen-Printed Carbon Electrode for Rapid Electrochemical Determination of As(III) in Water and Tea

Electrochemical Determination of Trace Lead(Ii) with Enhanced Sensitivity and Selectivity by Three-Dimensional Nanoporous Gold Leaf and Self-Assembled Homocysteine Monolayer

Reliable Electrochemical Sensing Arsenic(iii) in Nearly Groundwater Ph Based on Efficient Adsorption and Excellent Electrocatalytic Ability of AuNPs/CeO2-ZrO2 Nanocomposite

Noble-metal-free Fe3O4/Co3S4 nanosheets with oxygen vacancies as an efficient electrocatalyst for highly sensitive electrochemical detection of As(III)

Evaluation and Development of GO/UiO-67@PtNPs Nanohybrid-Based Electrochemical Sensor for Invisible Arsenic (III) in Water Samples

Synthesis of Nanoporous Gold Electrode and Its Application in Electrochemical Sensor

An aptasensor for arsenic on a carbon‑gold bi-nanoparticle platform

Dual-Signal Anodic Stripping Voltammetric Determination of Trace Arsenic(Iii) at A Glassy Carbon Electrode Modified with Internal-Electrolysis Deposited Gold Nanoparticles

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

The Ultra-sensitive Electrochemical Detection of As(III) in Ground Water Using Disposable L-cysteine/Lipoic Acid Functionalised Gold Nanoparticle Modified Screen-Printed Electrodes

Dual-Mode Optical Nanosensor Based on Gold Nanoparticles and Carbon Dots for Visible Detection of As(III) in Water

Electrochemical Detection Of Arsenic(Iii) Completely Free From Noble Metal: Fe3o4 Microspheres-Room Temperature Ionic Liquid Composite Showing Better Performance Than Gold

Electrochemically Decorated Gold Nanoparticles on CVD Graphene ChemFET Sensor for the Highly Sensitive Detection of As(III)

Selective determination of arsenic (III) using a Nafion/α-MnO2@polydopamine modified electrode