Abstract:Linker-free magnetite nanoparticles (Fe3O4NPs)-decorated gold nanoparticles (AuNPs) were grown using a new protocol that can be used as a new platform for synthesis of other intact metal–metal oxide nanocomposites without the need for linkers. This minimizes the distance between the metal and metal oxide nanoparticles and ensures the optimum combined effects between the two material interfaces. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the Fe3O4-Au nanocomposite, without any change in the magnetite phase. Characterization, using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, revealed the composite to consist of AuNPs of 70 ± 10 nm diameter decorated with tiny 10 ± 3 nm diameter Fe3O4NPs in Au:Fe mass ratio of 5:1. The prepared Fe3O4-Au nanocomposite was embedded in ionic liquid (IL) and applied for the modification of glassy carbon electrode (GCE) for the electrochemical detection of As(III) in water. By combining the excellent catalytic properties of the AuNPs with the high adsorption capacity of the tiny Fe3O4NPs towards As(III), as well as the good conductivity of IL, the Fe3O4-Au-IL nanocomposite showed excellent performance in the square wave anodic stripping voltammetry detection of As(III). Under the optimized conditions, a linear range of 1 to 100 μg/L was achieved with a detection limit of 0.22 μg/L (S/N = 3), and no interference from 100-fold higher concentrations of a wide variety of cations and anions found in water. A very low residual standard deviation of 1.16% confirmed the high precision/reproducibility of As(III) analysis and the reliability of the Fe3O4-Au-IL sensing interface. Finally, this proposed sensing interface was successfully applied to analyzing synthetic river and wastewater samples with a 95–101% recovery, demonstrating excellent accuracy, even in complex synthetic river and wastewater samples containing high concentrations of humic acid without any sample pretreatments.

Near-infrared-emitting persistent luminescent nanoparticles modified with gold nanorods as multifunctional probes for detection of arsenic(III)

Colorimetric Au nanoparticle probe for speciation test of arsenite and arsenate inspired by selective interaction between phosphonium ionic liquid and arsenite.

Detection of arsenic(III) through pulsed laser-induced desorption/ionization of gold nanoparticles on cellulose membranes

Chitosan-stabilized gold nanoparticles decorated with a thiodiacetic acid nanoprobe for selective detection of arsenic(iii) in rice and water samples

Rapid colorimetric detection of arsenic (III) by glutathione functionalized gold nanoparticles based on RGB extracting system

Nanoparticles Assembled by Aptamers and Crystal Violet for Arsenic(iii) Detection in Aqueous Solution Based on a Resonance Rayleigh Scattering Spectral Assay.

Ultrasensitive aptamer biosensor for arsenic(III) detection in aqueous solution based on surfactant-induced aggregation of gold nanoparticles.

Dual-mode nanoprobe for selective detection of arsenite based on yellow fluorescent carbon dots

A novel and sensitive electrochemical sensor based on nanoporous gold for determination of As(III)

Arsenic Ion Assisted Core–satellites Nano-Assembly of Gold Nanoparticles for Its Colorimetric Determination in Water

Adsorption of Arsenite on Gold Nanoparticles Studied with DNA Oligonucleotide Probes

A Colorimetric Assay for the Determination of Trace Arsenic Based on In-Situ Formation of AuNPs with Synergistic Effect of Arsine and Iodide.

Novel Electrochemical Sensing Platform Based on Ion Imprinted Polymer with Nanoporous Gold for Ultrasensitive and Selective Determination of As3+

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

Label-free Colorimetric Assay for Arsenic(iii) Determination Based on a Truncated Short Ssdna and Gold Nanoparticles

An enhanced electrochemical catalytic activity towards arsenic (III) detection based on FTO electrode modified with gold nanoparticles by irradiation and electrophoretic deposition

Screening arsenic(III)-binding peptide for colorimetric detection of arsenic(III) based on the peptide induced aggregation of gold nanoparticles.

Cationic Polymers and Aptamers Mediated Aggregation of Gold Nanoparticles for the Colorimetric Detection of Arsenic(iii) in Aqueous Solution.

Ag@Fe3O4 Core–Shell Surface-Enhanced Raman Scattering Probe for Trace Arsenate Detection

Bimetallic nanoparticles for arsenic detection

In Situ Formation of AuNPs in Liquid Bead-Headspace Microextraction of Arsine for Colorimetric Sensing of Trace As(III)