Abstract:As the construction and modernization of global navigation satellite systems (GNSS), in the near future, the four main navigation systems (GPS, BDS, GLONASS and GALILEO) as well as some regional systems such as QZSS and IRNSS will broadcast many signals in different frequency. Some of the signals may need further adjustment. In interim, the traditional hardware GNSS receivers which have high integration density and low flexibility are not suited for signals monitoring especially for those new signals.In order to meet the requirement of monitoring GNSS signals as well as the joint processing of them, a high-flexibility multi-system full-band real-time GNSS software receiver is developed. In addition to a wideband antenna, a RF front-end and a data acquisition card to fulfill down-conversion and AD conversion, the rest of receiver are implemented in an ordinary PC with a GPU. With efficient acquisition and tracking methods, the proposal receiver can process all of the civil signals from four main GNSS and some of the regional systems in real-time, including GPS L1C/A, L2C, L5, L1C, BDS B1, B2, GLONASS Gl, G2, GALILEO ElOS, E5a, E5b, QZSS L1C/A, L2C, L5, and L1C signals. Based on the software architecture, the receiver can provide PVT results, measurement results, and many intermediate data such as correlator outputs and raw bit stream which are necessary for signals monitoring and performance analysis. Meanwhile, the strong flexibility of this receiver makes it easy to expansion and update in the future. The GLONASS modernized signals as well as BDS Phase III signals can be quickly added to current receiver after the release of their interface control document (ICD).By using the proposed software receiver, this paper presents the real-time tracking states of all civil signals, the positioning results of each navigation signal, and the monitoring results of viable GNSS satellites. Finally, since the receiver can handle all the civil GNSS signals in real-time and has a flexible structure, it can be used as a dedicated development platform for various types of navigation research.

Data Transmission Optimization and AppIication in GNSS Receiver

Design and Implementation of a High-Speed Sonar Data Transmission System

Design and Implementation of Micro-Satellite Receiver Using CORDIC Algorithm

The Optimization of Algorithm and Implementation for Dual-Constellation Navigation Receiver

Parallel Processing Design of Multi-channel LIF Digital Receiver

The Optimized Method and Algorithms in the CPU&GPU-Based GNSS Software Receiver

The Design and Hardware Implementation of OFDM System Receiver Based on FPGA

A High Data-Rate Software Defined Radio Receiver Suited for Fpga Platforms

Starx A Gpu Based Multi-System Full-Band Real-Time Gnss Software Receiver

Architecture And Implementation Of Gnss Software Receiver For Compatibility And Interoperability Research

A 180nm fully-integrated dual-channel reconfigurable receiver for GNSS interoperations

The Research And Simulation Of Synchronization Algorithms Of Gbps Parallel Digital Receiver

Design of navigation computer based on DSP & FPGA

Dsp Implementation And Optimization Of Pseudo Analog Video Transmission Algorithm

Scalable Hardware-Efficient Architecture for Frame Synchronization in High-Data-Rate Satellite Receivers

On the Frequency Carrier Offset and Symbol Timing Estimation for CCSDS 131.2-B-1 High Data-Rate Telemetry Receivers

Implementation of a High-Sensitivity Global Navigation Satellite System Receiver on a System-on-Chip Field-Programmable Gate Array Platform

An Optimized And Payload Achievable Multiplexing Design Technique For Gnss Signals

Design of General Ground Integrated Test Intermediate Frequency Receiver for Satellite Transmission System (in Chinese)

Bitwise Based Real-Time Gnss Software Receiver

Cascaded Multitype Interferences Suppression Method Using Sparse Representation and Array Processing for GNSS Receiver