Abstract:The desiccant dehumidification system can separate the latent heat and sensible heat in the air-conditioning system and achieve energy savings by removing latent heat. Industrial waste heat and renewable energy could be utilized in desiccant dehumidification systems, where the desorption process can be performed below 70 °C. The vapor pressure and temperature of the regenerating air dictate the desorption process corresponding to the isotherm properties. This study has focused on the effects of various temperatures and humidity ratios of regeneration air on the performance of a desiccant dehumidifier using a polymer as an adsorbent. Experiments were performed using the regeneration air with the humidity ratios of 0.005 kg kg−1, 0.010 kg kg−1, 0.015 kg kg−1, and 0.020 kg kg−1, while the air temperatures were varied from 40 °C to 70 °C. The evaluation of this study employs the adsorption/desorption amount, average moisture removal capacity, and latent energy ratio (LER) of the regeneration process as key performance indexes. At the regeneration temperature of 68 °C, the peak desorption amount at the humidity ratio of 0.005 kg kg−1 and 0.010 kg kg−1 both reached 0.011 kg kg−1. The results indicated that the higher desorption temperature led to a higher desorption amount. Besides, with the increased desorption temperature, the average moisture removal capacity increases. In contrast, the high humidity ratio of regeneration air resulted in a weak dehumidification ability. Lower regeneration temperature was difficult to apply to regenerate the polymer-based desiccant under a high-humidity-ratio atmosphere. To attain a high LER, a lower humidity ratio of dry air and regeneration temperature was preferred. The regeneration air with a humidity ratio of 0.020 kg kg−1 is not suitable to apply in the dehumidification system in the temperature range of 40–70 °C.

The Choice For Liquid Desiccant Regeneration: Heating Air Or Heating Solution?

Effect of Regeneration Mode on the Performance of Liquid Desiccant Packed Bed Regenerator

Numerical Simulation On The Performance Of Regenerator In Liquid Desiccant Air Conditioning Systems

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

Heat and mass transfer model for desiccant solution regeneration process in liquid desiccant dehumidification system

Investigation on liquid desiccant regeneration for advanced air-conditioning: Aerodynamic thermal method versus mechanical vapor recompression method

Coupled Heat and Mass Transfer Characteristic in Packed Bed Dehumidifier/regenerator Using Liquid Desiccant

Experimental study of a liquid desiccant regeneration system: performance analysis for high feed concentrations

Optimization of heat and mass transfer processes between desiccant and moist air

Mass Transfer Performance Comparison of Two Commonly Used Liquid Desiccants: LiBr and LiCl Aqueous Solutions

Heat and mass transfer performance analysis of cross-flow regenerators in a liquid desiccant air conditioning system

Effects of temperature and humidity ratio on the performance of desiccant dehumidification system under low-temperature regeneration

Experimental Investigation of the Heat and Mass Transfer Between Air and Liquid Desiccant in a Cross-Flow Regenerator

Exergy Investigation of Three Ideal Regeneration Methods for Liquid Desiccant: Thermal Air, Mechanical Vapor Recompression and Electrodialysis Regeneration

RESEARCH ON THE FIELD UNIFORMITY PRINCIPLE IN LIQUID DESICCANT DEHUMIDIFIER/REGENERATOR

Performance Investigation of a Heat Pump Driven, Vacuum Liquid Desiccant Regeneration System

Analytical Solution Of Heat And Mass Transfer In Dehumidifier/Regenerator Of Liquid Desiccant Equipment

Handling Zone Dividing Method in Packed Bed Liquid Desiccant Dehumidification/regeneration Process

Analytical solutions of coupled heat and mass transfer processes in liquid desiccant air dehumidifier/regenerator

On The Importance Of Air-Solution Flow Rate Matching In Liquid-Desiccant Deep-Dehumidification System

Similarity of coupled heat and mass transfer between air–water and air–liquid desiccant direct-contact systems