Abstract:The extraction performance of solid-phase microextraction (SPME) fiber is significantly influenced by coating materials and fabricating process. It is urgently needed for fabricating robust SPME fiber with facile preparation methods. Herein, a novel polyimide (PI) @ covalent organic framework (COF) synthesized by 1,3,5-Tris (4-aminophenyl) benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP) fiber, named PI@TPB-DMTP fiber, was successfully fabricated with facile method at room temperature. Firstly, a COF crystals TPB-DMTP was in situ grown on stainless steel fiber, where the COF crystals was synthesized by the Schiff-base reaction between TPB and DMTP. Subsequently, the COF coating was covered with an ultrathin layer of PI through a simple dip-coating method to improve the fiber stability. By coupled PI@TPB-DMTP SPME fiber with gas chromatography-negative chemical ion-mass spectrometry (GC-NCI-MS), a sensitive analytical method was established for the determination of ultratrace polybrominated diphenyl ethers (PBDEs) in water sample. To achieve the best efficiency and sensitivity for the analysis of PBDEs, six potential influencing factors in extraction step and desorption step were optimized. Under optimized conditions, the established method showed high enhancement factors of 1470-3555, wide linear range of 0.05-100 ng L-1, low detection limits of 0.0083-0.0190 ng L-1, good repeatability for intra-day in the range of 3.71%-7.62% and inter-day in the range of 5.12%-8.81%, good reproducibility in the range of 6.83%-9.21%. The satisfactory recovery was ranged from 79.2% to 117.3% in determining real water samples. The excellent experimental performance was mainly attributed to the large specific surface area of TPB-DMTP, as well as the high permeability of porous PI film. The results demonstrated that the COF-based fiber showed great potential for analysis of PBDEs in complex environmental samples. (c) 2021 Published by Elsevier B.V.

A Polymeric Solid-Phase Microextraction Fiber for the Detection of Pharmaceuticals in Water Samples

Sulfuric Acid Modified Poly (GMA-EGDMA) Coating for Solid Phase Microextraction Coupled with High Performance Liquid Chromatography and Its Application to Determination of Four Pharmaceuticals and Personal Care Products in Water

Bioinspired Polyelectrolyte-Assembled Graphene-Oxide-Coated C18 Composite Solid-Phase Microextraction Fibers for in Vivo Monitoring of Acidic Pharmaceuticals in Fish.

Development of a Highly Robust Solid Phase Microextraction Fiber Based on Crosslinked Methyl Methacrylate–polyhedral Oligomeric Silsesquioxane Hybrid Polymeric Coating

Fabrication of a Polymeric Composite Incorporating Metal-Organic Framework Nanosheets for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons from Water Samples.

Bioinspired Polydopamine Sheathed Nanofibers for High-Efficient in Vivo Solid-Phase Microextraction of Pharmaceuticals in Fish Muscle

Development of A Solid-Phase Microextraction Fiber Coated with Poly(Methacrylic Acid-Ethylene Glycol Dimethacrylate) and Its Application for the Determination of Chlorophenols in Water Coupled with Gc

Sulfonated Nanoparticles Doped Electrospun Fibers with Bioinspired Polynorepinephrine Sheath for in Vivo Solid-Phase Microextraction of Pharmaceuticals in Fish and Vegetable

Carbon and Tin-Based Polyacrylonitrile Hybrid Architecture Solid Phase Microextraction Fiber for the Detection and Quantification of Antibiotic Compounds in Aqueous Environmental Systems.

Polymeric Ionic Liquid Modified Stainless Steel Wire As A Novel Fiber for Solid-Phase Microextraction

One-pot Polymerization of Monolith Coated Stir Bar for High Efficient Sorptive Extraction of Perfluoroalkyl Acids from Environmental Water Samples Followed by High Performance Liquid Chromatography-Electrospray Tandem Mass Spectrometry Detection.

A Novel Molecularly Imprinted Solid-Phase Microextraction Fiber Coupled with High Performance Liquid Chromatography for Analysis of Trace Estrogens in Fishery Samples

Electrospun Polymer Nanofibers As A Solid-Phase Extraction Sorbent for the Determination of Trace Pollutants in Environmental Water

Multiple Monolithic Fiber Solid-Phase Microextraction: a New Extraction Approach for Aqueous Samples.

Sheathed In-Situ Room-Temperature Growth Covalent Organic Framework Solid-Phase Microextraction Fiber for Detecting Ultratrace Polybrominated Diphenyl Ethers from Environmental Samples

A double-functionalized polymeric ionic liquid used as solid-phase microextraction coating for efficient aromatic amine extraction and detection with gas chromatography–mass spectrometry

Simple and rapid preparation of homemade SPME PDMS fibers and their application to the analysis of personal care products in water samples

Fabrication of a porous β-cyclodextrin-polymer-coated solid-phase microextraction fiber for the simultaneous determination of five contaminants in water using gas chromatography-mass spectrometry

Development of a Solid-Phase Extraction Method Based on Biocompatible Starch Polyurethane Polymers for GC-MS Analysis of Polybrominated Diphenyl Ethers in Ambient Water Samples

Automated Online Solid-Phase Extraction Liquid Chromatography Tandem Mass Spectrometry Investigation for Simultaneous Quantification of Per- and Polyfluoroalkyl Substances, Pharmaceuticals and Personal Care Products, and Organophosphorus Flame Retardants in Environmental Waters.

Preparation of C18 Composite Solid-Phase Microextraction Fiber and Its Application to the Determination of Organochlorine Pesticides in Water Samples