Abstract:This study aimed to establish a method for the rapid determination of trace estrogens in honey samples by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) using imine-linked porous covalent organic framework material (IL-COF-1) as the adsorbent for solid-phase extraction (SPE). Estradiol (E1), diethylstilbestrol (DES), estriol (E3), β-estradiol (E2), and ethinylestradiol (EE2) were used as the target analytes. A single factor optimization method was performed to optimize the extraction effect by adding estrogens to honey samples. The optimal conditions were as follows. A total of 30 mg IL-COF-1 was filled in the SPE column. The sample pH was adjusted to 7. The sample was loaded at a flow rate of 3 mL/min and eluted with 5 mL of a 1% (v/v) NH3·H2O-methanol solution. The flow rate of the eluent was 0.4 mL/min. NaCl was not added in the extraction process. HPLC coupled to electrospray ionization and triple quadrupole mass spectrometry was introduced to quantify the estrogens in the extracts. The estrogens were separated on a Thermo Fisher Scientific C18 analytical column (100 mm×2.1 mm, 5 μm). Acetonitrile and 5 mmol/L ammonium acetate solution were used as the mobile phases for gradient elution. The column temperature was set at 40 ℃, and the autosampler temperature was maintained at 10 ℃. The rapid qualitative and quantitative analysis of the five estrogens in the honey samples was operated under multiple reaction monitoring mode in a negative electrospray ion source mode. IL-COF-1 prepared in six batches was used as a filler for the SPE column. The relative standard deviations (RSDs) of the recoveries of the estrogens among different batches were 5.2%-9.1%. The reusability of IL-COF-1 material was assessed. After six SPE cycles on the same solid-phase extraction column, the RSDs of the estrogen recoveries were 2.5%-6.1%, indicating that IL-COF-1 has good reusability. The recoveries of estrogens obtained on an IL-COF-1 solid-phase extraction column within 6 days (tested once a day) were 95.1%-107.4%, and the RSDs were 6.2%-8.9%. These results confirmed that the SPE filler had good stability. The method validation results showed that the linear detection ranges were 1-500 ng/g for E3, E2, and EE2, and 0.1-100 ng/g for E1 and DES withe the correlation coefficients of 0.9934-0.9972. The limits of detection (LODs, S/N=3) were 0.01-0.30 ng/g, and the limits of quantification (LOQs, S/N=10) were 0.05-0.95 ng/g. Five estrogens were added (50 ng/g) for the repeated experiments. The RSDs of the intra-day precision were 3.2%-6.6%. The RSDs of the inter-day precision were 4.2%-7.9%. This method was applied to determine the estrogen levels in four honey samples, and no estrogen was found. The recoveries of the five estrogens in sample spiked at three levels including low, middle, and high levels were investigated, and satisfactory recoveries (80.1%-115.2%) were obtained. The SPE-HPLC-MS/MS method based on IL-COF-1 is rapid, accurate, and sensitive, making it suitable for analyzing and detecting estrogen in honey. Further exploration of the use of IL-COF-1 for the extraction processes is in progress.

A Novel Molecularly Imprinted Solid-Phase Microextraction Fiber Coupled with High Performance Liquid Chromatography for Analysis of Trace Estrogens in Fishery Samples

Molecularly Imprinted Solid-Phase Extraction for the Selective Determination of 17Β-Estradiol in Fishery Samples with High Performance Liquid Chromatography

Molecularly imprinted polymer-based fiber array extraction of eight estrogens from environmental water samples prior to high-performance liquid chromatography analysis

An Analytical Method for Estrogens in Milk Powder by Pseudo Template Imprinted Polymer Coated Fiber Coupled with Hplc

Molecularly imprinted polymers prepared from a single cross-linking functional monomer for solid-phase microextraction of estrogens from milk

Magnetic Molecularly Imprinted Nanoparticles Based on Dendritic-Grafting Modification for Determination of Estrogens in Plasma Samples

Development and Application of Dispersion Solid-Phase Extraction for Estrogens in Aquatic Animal Samples

The Study of Core–shell Molecularly Imprinted Polymers of 17Β-Estradiol on the Surface of Silica Nanoparticles

Molecularly imprinted solid-phase extraction combined with non-ionic hydrophobic deep eutectic solvents dispersed liquid-liquid microextraction for efficient enrichment and determination of the estrogens in serum samples

Molecular imprinted solid phase extraction combined with determination of diethylstilbestrol in environmental water samples

A method by homemade OH/TSO-PMHS fibre solid-phase microextraction coupling with gas chromatography-mass spectrometry for analysis of antiestrogens in biological matrices

Turning the tide in lung cancer

Indirect Inhibitive Immunoassay for Estradiol Using Surface Plasmon Resonance Coupled to Online In-Tube Spme

B-cell antigen marker expression in nasopharyngeal carcinoma.

Fabrication and evaluation of a molecular-imprinted-polymer functionalized electrode for selective electric field-assisted solid-phase microextraction of phytohormones

Self-assembly Molecularly Imprinted Polymers of 17Β-Estradiol on the Surface of Magnetic Nanoparticles for Selective Separation and Detection of Estrogenic Hormones in Feeds

[Imine-linked porous covalent organic framework used for the solid-phase extraction of estrogens from honey prior to liquid chromatography-tandem mass spectrometry]

The Research of Fluorescent Sensing to Endocrine Disruptor 17Β-Estradiol Measured by Microsphere Molecularly Imprinted Polymer

Preparation of Estriol–molecularly Imprinted Silica Nanoparticles for Determining Oestrogens in Milk Tablets

Polydopamine‐coated cotton fibers as the adsorbent for in‐tube solid‐phase microextraction

Mesoporous yolk-shell structure molecularly imprinted magnetic polymers for the extraction and detection of 17 beta-estradiol