Abstract:The performance of fresh (PdV/TiO2), sulfur poisoned (Used-S and Used-H), and regenerated (Used-RS and Used-RH) multi-active center catalysts for chlorobenzene catalytic oxidation and selective catalytic reduction (CBCO + SCR) reaction is investigated. The reaction on the catalyst surface is blocked after sulfur poisoning owing to the occupation and deposition of catalyst active centers (mainly Pd centers) by PdSO4 (and/or PdS in a dry environment) and NH4HSO4 species, especially the CBCO process. Sulfates (mainly NH4HSO4) on the sulfur poisoned catalyst surface are partially decomposed after 400 °C thermal regeneration, while the deactivation caused by the formation of PdSO4 species is irreversible. Density functional theory calculation results show that in the PdSO4 and NH4HSO4 generation paths, each step of the elementary reaction has just a small energy barrier to overcome, and the stability of the product for each elementary reaction increases gradually. Even worse, SO2 is easily combined with H2O gas molecules to form H2SO3 in a humid environment, and the energy barrier for conversion of SO32– to SO42– is just 0.041 eV. The two oxygen vacancies (VOx-1 or TiOx-1) provide adsorption sites for CBCO + SCR reaction gas molecules but do not exhibit adsorption properties for SO2, which gives a possible idea for optimization of sulfur resistance. The present work is favorable for further synergistic removal of CB/NOx by the catalyst for anti-SO2 poisoning modification and application in the manufacture industry.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.1c03617.Details of the Section 2 in this work; reaction condition information, general properties, gaseous reaction byproducts, and Raman analysis; HRTEM image and pyridine-IR profile (Figure S1); basic information of the Pd0.12V4/TiO2 catalyst (Table S1); CB TOF (Table S2); NO TOF (Table S3); effect of 600 ppm SO2 on CB/NO conversion and CO2/N2 selectivity (Figure S2); CB oxidation products (Table S4); gaseous compounds (Figure S3); physicochemical properties of catalysts (Table S5); SEM-EDS mapping images (Figure S4); Raman spectra (Figure S5); Ti 2p XPS profiles (Figure S6); H2-TPR profiles (Figure S7); in situ DRIFT spectra (Figure S8); corresponding species for in situ DRIFT spectra peaks (Table S6); optimized multi-active center catalyst structure (Figure S9); dehydrogenation path for H2O (Figure S10); coadsorption configurations and PDOS of SO2 with NO, NO2, O2, NH3, and H2O gas molecules (Figure S11); adsorption energy and bond information of SO2 with NO, NO2, O2, NH3, and H2O (Table S7); competitive adsorption of CB and SO2 (Figure S12); adsorption configuration and PDOS of NO, NH3, and CB on O vacancies (Figure S13); removal path and energy barrier of CB (Figure S14); configurations and PDOS for SO2 on O vacancies (Figure S15); oxidation path of PdSO4 by NO2 (Figure S16); and generation path of NH4SO4ads (Figure S17) (PDF)This article has not yet been cited by other publications.

Getting insight into the oxidation of SO2 to SO3 over P modified VW/Ti catalyst: Effect and inhibition mechanism

Insights into the Effects of Sulfate Species on CuO/TiO2 Catalysts for NH3-SCR Reactions

Promotional effect of phosphorus addition on improving the SO2 resistance of V2O5-MoO3/TiO2 catalyst for NH3-SCR of NO

Improved activity and significant SO2 tolerance of Sb-Pd-V oxides on N-doped TiO2 for CB/NOx synergistic degradation.

Pt modulates the electronic structure of Pd to improve the performance of Pd-based catalytic combustion catalyst

Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

Performance of soot oxidation by O 2 /NO/N 2 atmosphere in various catalyst species

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO 2 -Promoted C 3 H 8 Combustion over a Pt/TiO 2 Catalyst

Enhancement of low temperature NH3-SCR activity and SO2 & H2O tolerance over VPO-Co/TiO2: Determining roles of acidity via Co doping

SO 2 Poisoning Mechanism of the Multi-active Center Catalyst for Chlorobenzene and NO x Synergistic Degradation at Dry and Humid Environments

Effects of tungsten oxide on soot oxidation activity and sulfur poisoning resistance of Pt/Al2O3 catalyst

Effects of H2O and SO2 on the Performance of V2O5/TiO2 Catalysts for Selective Catalytic Reduction of NO in Flue Gas

Novel Methods for Assessing the SO2 Poisoning Effect and Thermal Regeneration Possibility of MOx-WO3/TiO2 (M = Fe, Mn, Cu, and V) Catalysts for NH3-SCR

Promotion Effect of Tungsten Oxide on SCR of NO with NH3 for the V2O5–WO3/Ti0.5Sn0.5O2 Catalyst: Experiments Combined with DFT Calculations

Correction to “promoter Rather Than Inhibitor: Phosphorous Incorporation Accelerates the Activity of V2O5–WO3/TiO2 Catalyst for Selective Catalytic Reduction of NOx by NH3”

Investigation of the promotion effect of WO3 on the decomposition and reactivity of NH4HSO4 with NO on V2O5–WO3/TiO2 SCR catalysts

Prominent difference in the deactivation rate and mechanism of V2O5/TiO2 under H2S or SO2 during selective catalytic reduction of NOx with NH3

SO2 Promoted V2O5-MoO3/TiO2 Catalyst for NH3-SCR of NOx at Low Temperatures

Inhibition effects of Pb species on the V2O5-MoO3/TiO2 catalyst for selective catalytic reduction of NO with NH3: A DFT supported experimental study

Highly Efficient Mesoporous V2O5/WO3–TiO2 Catalyst for Selective Catalytic Reduction of NOx: Effect of the Valence of V on the Catalytic Performance

Simple Solid Mixed Pt/TiO2-ZrO2 Catalyst for CO Oxidation with Excellent Sulfur and Water Resistance at Relatively Low Temperature