Abstract:Lead-free flexible piezoelectric and triboelectric nanogenerators are sought after due to their ability to produce electricity by harnessing wasteful mechanical energy. A comprehensive understanding of additives and processing techniques is crucial for fine-tuning the performance of such energy systems. We have investigated in detail the effect of the addition of reverse microemulsion synthesized barium tungstate nanorods (BWN) on morphology, crystallinity, polymorphism of electrospun nanofabrics of poly(vinylidene fluoride) (PVDF). The electroactive phase content of the nanofabrics was enhanced upon the addition of BWN and the highest electroactive phase content of 86.5% was observed in the nanofabric containing 3 wt% of BWN. The dielectric constant of the nanofabric containing 5 wt% BWN was ~1.96 times higher than that of pristine PVDF nanofabric (EPVDF). The ratio of relative change in the capacitance to initial capacitance of the sensor fabricated from the same system was ~4 times greater than that of EPVDF. Consequently, its piezoelectric and triboelectric performances were improved. The piezoelectric nanogenerator fabricated using the nanofabric containing 3 wt% BWN produced the highest open-circuit voltage of 8 V under an applied load of 8 N. A triboelectric nanogenerator made using the same system was able to produce a voltage output of 200 V, which was 1.77 times as high as that of EPVDF under one-finger tapping in contact-separation mode. The same composite nanofabric produced piezoelectric and triboelectric power densities of 4.3 μW/cm2 and 646 μW/cm2, respectively. The triboelectric nanogenerator was able to light forty LEDs under one finger tapping. Fluttering-driven triboelectric nanogenerator fabricated using the aforementioned nanofabric was able to produce a triboelectric voltage of 84 V at a wind speed of 7 m/s. Overall, these nanofabrics could be a potential material for energy harvesting devices for powering wearable devices, environmental sensors, and internet of things.

Plasma engineering of microstructured piezo and triboelectric hybrid nanogenerators for wide bandwidth vibration energy harvesting

Paper-based ZnO self-powered sensors and nanogenerators by plasma technology

3D core@multishell piezoelectric nanogenerators

Integrated Nanospheres Occupancy-Removal and Thermoforming into Bulk Piezoelectric and Triboelectric Hybrid Nanogenerators with Inverse Opal Nanostructure

Hybrid piezoelectric nanogenerator based on PVDF film and vertically aligned ZnO nanorods for energy harvesting applications

Supersonically Sprayed Pvdf and Zno Nanoflowers with Built-In Nanocuboids for Wearable Piezoelectric Nanogenerators

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Characterization of hybrid piezoelectric nanogenerators through dynamic asymptotic homogenization

Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics

Piezoelectric Energy Harvesting Using Flexible Self-Poled Electroactive Nanofabrics Based on PVDF/ZnO-Decorated SWCNT Nanocomposites

A Scalable Nanogenerator Based on Self-Poled Piezoelectric Polymer Nanowires with High Energy Conversion Efficiency

A Review of Plasma-Synthesized and Plasma Surface-Modified Piezoelectric Polymer Films for Nanogenerators and Sensors

Coupling Enhanced Performance of Triboelectric–Piezoelectric Hybrid Nanogenerator Based on Nanoporous Film of Poly(vinylidene fluoride)/BaTiO 3 Composite Electrospun Fibers

A Flexible Triboelectric-Piezoelectric Hybrid Nanogenerator Based on P(VDF-TrFE) Nanofibers and PDMS/MWCNT for Wearable Devices

Flexible Composites with Rare-Earth Element Doped Polycrystalline Particles for Piezoelectric Nanogenerators

A Wave-Shaped Hybrid Piezoelectric and Triboelectric Nanogenerator Based on P(VDF-TrFE) Nanofibers.

Flexible Piezoelectric Nanogenerators Based on ZnO Nanorods Grown on Common Paper Substrates

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Supersonically Sprayed Flexible ZnO/PVDF Composite Films with Enhanced Piezoelectricity for Energy Harvesting and Storage

R-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity.

MXene/Multiwalled Carbon Nanotube/Polymer Hybrids for Tribopiezoelectric Nanogenerators