Abstract:Lead-free flexible piezoelectric and triboelectric nanogenerators are sought after due to their ability to produce electricity by harnessing wasteful mechanical energy. A comprehensive understanding of additives and processing techniques is crucial for fine-tuning the performance of such energy systems. We have investigated in detail the effect of the addition of reverse microemulsion synthesized barium tungstate nanorods (BWN) on morphology, crystallinity, polymorphism of electrospun nanofabrics of poly(vinylidene fluoride) (PVDF). The electroactive phase content of the nanofabrics was enhanced upon the addition of BWN and the highest electroactive phase content of 86.5% was observed in the nanofabric containing 3 wt% of BWN. The dielectric constant of the nanofabric containing 5 wt% BWN was ~1.96 times higher than that of pristine PVDF nanofabric (EPVDF). The ratio of relative change in the capacitance to initial capacitance of the sensor fabricated from the same system was ~4 times greater than that of EPVDF. Consequently, its piezoelectric and triboelectric performances were improved. The piezoelectric nanogenerator fabricated using the nanofabric containing 3 wt% BWN produced the highest open-circuit voltage of 8 V under an applied load of 8 N. A triboelectric nanogenerator made using the same system was able to produce a voltage output of 200 V, which was 1.77 times as high as that of EPVDF under one-finger tapping in contact-separation mode. The same composite nanofabric produced piezoelectric and triboelectric power densities of 4.3 μW/cm2 and 646 μW/cm2, respectively. The triboelectric nanogenerator was able to light forty LEDs under one finger tapping. Fluttering-driven triboelectric nanogenerator fabricated using the aforementioned nanofabric was able to produce a triboelectric voltage of 84 V at a wind speed of 7 m/s. Overall, these nanofabrics could be a potential material for energy harvesting devices for powering wearable devices, environmental sensors, and internet of things.

MXene/Multiwalled Carbon Nanotube/Polymer Hybrids for Tribopiezoelectric Nanogenerators

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Coupling Enhanced Performance of Triboelectric–Piezoelectric Hybrid Nanogenerator Based on Nanoporous Film of Poly(vinylidene fluoride)/BaTiO 3 Composite Electrospun Fibers

Multilayered Flexible Nanocomposite for Hybrid Nano- Generator Enabled by Conjunction of Piezoelectricity and Triboelectricity

Enhanced Hybrid Nanogenerator Based on PVDF-HFP and PAN/BTO Coaxially Structured Electrospun Nanofiber

Coupling Enhanced Performance of Triboelectric–Piezoelectric Hybrid Nanogenerator Based on Nanoporous Film of Poly(vinylidene Fluoride)/batio3 Composite Electrospun Fibers

Remarkably enhanced hybrid piezo/triboelectric nanogenerator via rational modulation of piezoelectric and dielectric properties for self-powered electronics

A Flexible Multifunctional Triboelectric Nanogenerator Based on MXene/PVA Hydrogel

Combined Triboelectric and Piezoelectric Effect in ZnO/PVDF Hybrid-Based Fiber-Structured Nanogenerator with PDMS:Carbon Black Electrodes

All-electrospun Flexible Triboelectric Nanogenerator Based on Metallic MXene Nanosheets

Silane-Modified MXene/PVA Hydrogel for Enhanced Streaming Vibration Potential in High-Performance Flexible Triboelectric Nanogenerators

Development of a flexible piezoelectric and triboelectric energy harvester with piezo capacitive sensing ability from barium tungstate nanorod-dispersed PVDF nanofabrics

Hybrid tribo/piezoelectric nanogenerator textile derived from 3D interlocked parallel-arranged yarns for bio-motion energy harvesting and tactile sensing

MXene-functionalized KNN dielectric nanofillers incorporated in PVA nanofibers for high-performance triboelectric nanogenerator

Development of Turbocharging‐Ability Hybrid Nanogenerators Comprising Bipolar PVDF‐HFP/MXene Electrospun Composites

Performance enhancement of transparent and flexible triboelectric nanogenerator based on one-dimensionally hybridized copper/polydimethylsiloxane film

R-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity.

Piezo-triboelectric hybridized nanogenerator embedding MXene based bifunctional conductive filler in polymer matrix for boosting electrical power

Integrated Nanospheres Occupancy-Removal and Thermoforming into Bulk Piezoelectric and Triboelectric Hybrid Nanogenerators with Inverse Opal Nanostructure

A Wave-Shaped Hybrid Piezoelectric and Triboelectric Nanogenerator Based on P(VDF-TrFE) Nanofibers.