Abstract:Summary form only given. Previous researches have certified that diffuse plasma can be generated in some mixture gas gap between needle and plate, which may have potential application in biomedicine, film surface modification etc. In this paper, a self-consistent, multiple species, two-dimension numerical model, based on hydromechanics and electric Poisson's equation, is established to study the properties of gas-mixture discharge in needle-to-plate structure with a 0.1mm gas gap, where the needle is connected to high voltage sources and the grounded plate electrode is covered by a 0.03mm PTFE film. Moreover, the gas-mixture is consisted of 99% helium and 1% air (79% nitrogen and 21% oxygen) while 11 kinds of particles and 27 kinds of chemical reactions are taken into account. After about one-week computation, models driven by both positive and negative 400 V pulse voltages are solved respectively, which releases that electron has similar and dispersive distribution in both positive and negative discharge when it is at the peak of discharge current pulse, differing slightly from that of streamer. Then, the spatial and temporal evolutions of neutral particles (O 3 , O, N, He* etc.) are analyzed, which demonstrates that the ozone and oxygen atom have their maximum density near the cathode regardless of the polarity of voltage, and the high concentration area of nitrogen atoms and metastable helium atoms are always behind the head of ionization wave. Through the model, it can be proven precisely that the electrical field can be distorted by the electric field created by 8 kinds of charged particles, where various ions have very different spatial and temporal distribution because of the different production mechanism and ion mobility. In the process of discharge, Penning reaction and charge exchange reactions are believed to be significant in the production of some ions (e.g. N 2 + , O 2 + etc.) and seeding electron.

Supersonic Flow past a Sharp Plate with Surface Anomalous Glow Discharge in a Magnetic Field

Anomalous Glow Discharge between Two Electrodes on the Same Surface in a Transverse Magnetic Field

Diffusion-Drift Model of the Surface Glow Discharge in Supersonic Gas Flow

Supersonic Gas Flow in a Plane Channel with a Normal Glow Discharge in the Magnetic Field

Experimental and Numerical Investigation of a Surface Sliding Discharge in a Supersonic Flow with an Oblique Shock Wave

A Study of the Plasma Jet Formed by the Glow Discharge in an Air Flow in the Electrode System of a Gliding Arc

Physical Characteristics of Gliding Arc Discharge Plasma Generated in a Laval Nozzle

Direct Numerical Simulation of Unstable Stratified Turbulent Flow under a Magnetic Field

Influence of the Ambipolar Field on the Formation of Electron Phase Flows in the Positive Column of a Glow Discharge in a Nitrogen-Like Gas

Electron Kinetics in a Positive Column of AC Discharges in a Dynamic Regime

2D Numerical Research on Needle-to-plate Discharge in Atmospheric Pressure Helium and Air Mixture

Low-pressure Planar Magnetron Discharge for Surface Deposition and Nanofabrication

Numerical study of a sonic jet in a supersonic crossflow over a flat plate

Low-current gliding DC discharge in high-speed flows

Longitudinal structure and plasma parameters of an entire DC glow discharge as obtained using a 1D fluid-based model with non-local ionization

Radiation–Magnetogasdynamic Calculations in the Interaction of Powerful Energy Flows with Matter in a Magnetic Field

Particle-in-cell simulations of anomalous transport in a Penning discharge

Modelling plasma discharges at high electronegativity

Magnetohydrodynamic Numerical Study in a Supersonic Plasma Torch

Numerical and Experimental Study of Supersonically Expanding Argon Plasma Using a Micrometer Hollow Cathode Discharge

Numerical Simulation of the Voltage–Current Characteristic of an Atmospheric Pressure Discharge: The Glow-to-Arc Transition