Abstract:In this manuscript, we consider the accuracy of end-point carbon content prediction affected by oxygen injection in multiple stages of electric arc furnace (EAF) melting process. Such a prediction would help to further evaluate process control strategies and optimize overall operation of the electric arc furnace. Principal component analysis (PCA) was used to normalize the 13 input variables affecting the endpoint carbon content. log-sigmoid and tan-sigmoid functions were used to verify the same sample, and it was found that the Mean squared error(MSE) of the model under logsig + logsig function was smaller, indicating that the model was more stable. At the same time, different hidden layer nodes were tried, and finally the structure of the model was determined as 13 × 10 × 8 × 1, and the activation function was logsig + logsig. Using historical smelting data to train and test the neural network model, the correlation coefficient (R) of the verified model is 0.7632, the model prediction is in the range of ±0.03%, the hit rate of the model is 64.5%, and the hit rate of the model is 42% in the range of ±0.02%. Combining the verification basis of the model with the metallurgical reaction principle of the EAF steelmaking process, a pretreatment method of phased input of total oxygen is proposed. The oxygen is divided into three stages, which are the oxygen consumption volume of 0–5 min, 5–30 min and more than 30 min and other variables are kept unchanged. The same neural network is used to train and verify the same data. After verification, the R of the oxygen staged model is 0.8274. The model prediction is in the range of ±0.03%, the hit rate of the model is 78.5%, and the hit rate of the model is 58% in the range of ±0.02%. Finally, an on-line carbon content prediction system based on artificial neural network model is developed and applied to actual production. Running results illustrated that the hit rate of end-point carbon content is 96.67%, 93.33% and 86.67%, respectively when the prediction errors are within ±0.05%, ±0.03% and ±0.01%, the improved neural network model can effectively predict the end-point carbon content, which provides a good basis for the carbon content at the end point of EAF steelmaking process.

Evaluating of the Exergy Efficiency of the Silicon Production Process Using Artificial Neural Networks

Predicting the Electricity Consumption and the Exergetic Efficiency of a Submerged Arc Furnace with Raw Materials Using an Artificial Neural Network

Application of improved EMD-Elman neural network to predict silicon content in hot metal

Hybrid-Model-Based Intelligent Optimization of Ironmaking Process

The effect of the carbonaceous materials properties on the energy consumption of silicon production in the submerged arc furnace

Artificial Neural Network Modeling for Evaluating the Power Consumption of Silicon Production in Submerged Arc Furnaces

Effect of Raw Materials on the Production Process of the Silicon Furnace

Application of an Artificial Neural Network for Efficient Computation of Chemical Activities within an EAF Process Model

Influence of carbon material on the production process of different electric arc furnaces

Prediction Model of Carbon-containing Pellet Reduction Metallization Ratio Using Neural Network and Genetic Algorithm

Predictive system for blast furnaces by integrating a neural network with qualitative analysis

Modeling Method Of Carbon Efficiency In Iron Ore Sintering Process

Exergy Efficiency and Energy Analysis of Silicon Production Using Coffee Husks as a Carbon Material

An improved artificial neural network model for predicting silicon content of blast furnace hot metal

Performance analysis of waste biomass gasification and renewable hydrogen production by neural network algorithm

Predicting endpoint parameters of electric arc furnace–based steelmaking using artificial neural network

Influence Factor Analysis and Prediction Model of End-Point Carbon Content Based on Artificial Neural Network in Electric Arc Furnace Steelmaking Process

Biomass chemical exergy estimation using novel intelligent tool: application to biorefinery sustainability

A Data-Driven Model for Energy Consumption in the Sintering Process

Optimization Method for Carbon Efficiency in the Green Manufacturing of Sinter Ore and Its Application

Optimization of combustion for pellet shaft furnace based on artificial neural network and genetic algorithm