Abstract:As a promising green technology, Integrated Gasification Combined Cycle (IGCC) plant is more efficient and low-pollution electricity generation choice than conventional thermal power plants. Its process is mainly consist of the gasifier, the air separation unit and the combined cycle unit. Going through those key blocks, the fuel, such as coal and biomass, could be converted to syngas and further combusted for power generation. In order to be a viable technology, the bottleneck is located on the high energy production cost, which could be overcame by improving the plant efficiency through process optimisation and Integration. The opportunity and challenge are given by the complicated configuration and extreme operation conditions, which also demands a flexible and robust IGCC plant simulation to complete deep process analysis. In this work, a novel simplified IGCC mathematical model is proposed considering thermodynamics constraints with energy and mass conservation. The gasification is simulated based on the principle of Gibbs free energy minimisation, which holds the good feature of avoiding potential bi-level optimisation problem. The proposed gasification model results in syngas composition similar to the experimental data provided in literature. Meanwhile, the cryogenic air separation unit is selected with the double distillation column configuration, which is simulated considering the novel simplification of thermal coupled distillation columns. What is more, the combined cycle unit is simulated with isentropic assumption plus efficiency to complete the process. To validate the novel simplified IGCC model, one base case is built and compared with literature data. Another highlight of this work is the simultaneous optimisation and integration methodology instead of conventional sequential one, which gives more guarantee for achieving global optimal solution. If the ideal property assumptions are occupied, a graphical approach could be generated for the simultaneous optimization and integration of IGCC plant. The best material and energy integration scheme in proper operation condition could be selected considered with respect to the overall thermal efficiency of the IGCC plant. The good performance is shown by about 10 % power increment compared with the base case in the case study.

Self-heating optimization of integrated system of supercritical water gasification of biomass for power generation using artificial neural network combined with process simulation

Integrated modeling of bed temperature for a circulating fluidized bed incinerator

High Dimensional Model Representation Approach for Prediction and Optimization of the Supercritical Water Gasification System Coupled with Photothermal Energy Storage

Combustion optimization of ultra supercritical boiler based on artificial intelligence

Simulation of a new biomass integrated gasification combined cycle (BIGCC) power generation system using Aspen Plus: Performance analysis and energetic assessment

Parametric Optimization Design for Supercritical CO2 Power Cycle Using Genetic Algorithm and Artificial Neural Network

Modelling of Biomass Gasification Through Quasi-Equilibrium Process Simulation and Artificial Neural Networks

Simultaneous Optimisation and Integration of Igcc Plant Using Graphical Method

A Conceptual Framework for Biomass Gasifier Design Using a Semi-Empirical Model and Heuristic Algorithm

ANN-GA based optimization of a high ash coal-fired supercritical power plant

Simulation and modeling of hydrogen production and power from wheat straw biomass at supercritical condition through Aspen Plus and ANN approaches

Process modelling and optimization of a 250 MW IGCC system: Model setup, validation, and preliminary predictions

Experimental and Modeling Investigation of an Integrated Biomass Gasifier–engine–generator System for Power Generation and Waste Heat Recovery

Simulation of Integrated Gasification Combined Cycle (IGCC) and Performance Analysis

Process modelling and optimization of a 250 MW IGCC system: ASU optimization and thermodynamic analysis

Simulation of Biomass Gasification with a Hybrid Neural Network Model.

The Micro CCHP System Model and Simulation Based on Artificial Neural Network

Integrated process for simulation of gasification and chemical looping hydrogen production using Artificial Neural Network and machine learning validation

Multi-aspect analysis and multi-objective optimization of a novel biomass-driven heat and power cogeneration system; utilization of grey wolf optimizer

Process modelling and thermodynamic performance optimization of biomass air gasification fuelled with waste poultry litter pellet by integrating Aspen plus with RSM

Dynamic Modelling And Simulation Of Igcc Process With Texaco Gasifier Using Different Coal