Abstract:In an active vibration control (AVC) system, the secondary path can generally only be identified when the system has been built. The performance of a typical adaptive feedforward control system using the filtered-x least mean square (FxLMS) algorithm is heavily dependent upon the dynamic characteristics of the secondary path. It would, therefore, be helpful for engineers to have knowledge of this behavior early in the design process. In this paper, pre-identification of the secondary path is proposed, which means its offline identification model can be obtained without installing the AVC equipment. This can save both time and money. In the pre-identification process, the secondary path is split into three parts. The first part includes the actuator and related electrical equipment. The frequency response function of this part can be identified after the hardware has been selected. The second part involves the dynamic behavior of the structure to be controlled, which is identified by impact excitation using a specially developed pneumatic impact harmer. The third part concerns the analogue/digital and digital/analogue converters whose effect on the secondary path is offset by a phase shift corresponding to half the sampling time. In this paper, the pre-identification process of the secondary path components is described, and some experiments are conducted to verify the feasibility of the approach and to demonstrate the significance of the pre-identification results. This mainly involves predicting the control performance and optimizing the parameters of the control system. Combined with the simulation of the control system, the approach proposed can improve the work efficiency of large-scale engineering projects and reduce the cost of testing.

An Adaptive Algorithm For Active Vibration Control Of Parameter-Varying Systems With A New Online Secondary Path Estimation Method

Research on Frequency-Selective Output Constraint Algorithm for Active Vibration Control

Adaptive Vibration Suppression of Time-Varying Structures with Enhanced FxLMS Algorithm

Online Secondary Path Modeling Method for an Adaptive Active Noise Control System

An Adaptive Feedback Vibration Control Algorithm

A Fast Vibration-Level Adjustment Method for Low-Frequency Vibration Calibration Based on Modified Filtered-X Least Mean Square Algorithm

Active Vibration Control for the Time-Varying Systems with a New Adaptive Algorithm

Active Control of a Two-Stage Active Vibration Isolation System with Online Secondary Path Modeling

A Robust Filtered-X LMS Algorithm for Active Vibration Control

Active Vibration Control of a Time-Varying Shafting System Using an Adaptive Algorithm with Online Auxiliary Filter Estimation

Predicting the performance and optimizing the control parameters of an active vibration control system by pre-identifying the secondary path

Robust Adaptive Control for Robotic System with External Disturbance and Guaranteed Parameter Estimation

A simultaneous equation method-based online secondary path modeling algorithm for active noise control

Extended Filtered-X-least-mean-squares Algorithm for an Active Control Engine Mount Based on Acceleration Error Signal

Adaptive Filter Algorithm for Active Vibration Control of Gear Transmission

Active Vibration Control of Time-Varying Structural Systems with a Logic FxLMS Algorithm

A Modified Filtered-X Lms Algorithm for Active Control of Periodic Noise with On-Line Cancellation Path Modelling

An Online Secondary Path Modeling Method with Regularized Step Size and Self-Tuning Power Scheduling.

Secondary Path Estimation by Pca-Compressed Frequency Response Function in Active Vibration Control

Problems on Online Secondary Path Modeling in Active Noise and Vibration Control System

Active vibration control of gear meshing based on online secondary path identification algorithm