Abstract:In an active vibration control (AVC) system, the secondary path can generally only be identified when the system has been built. The performance of a typical adaptive feedforward control system using the filtered-x least mean square (FxLMS) algorithm is heavily dependent upon the dynamic characteristics of the secondary path. It would, therefore, be helpful for engineers to have knowledge of this behavior early in the design process. In this paper, pre-identification of the secondary path is proposed, which means its offline identification model can be obtained without installing the AVC equipment. This can save both time and money. In the pre-identification process, the secondary path is split into three parts. The first part includes the actuator and related electrical equipment. The frequency response function of this part can be identified after the hardware has been selected. The second part involves the dynamic behavior of the structure to be controlled, which is identified by impact excitation using a specially developed pneumatic impact harmer. The third part concerns the analogue/digital and digital/analogue converters whose effect on the secondary path is offset by a phase shift corresponding to half the sampling time. In this paper, the pre-identification process of the secondary path components is described, and some experiments are conducted to verify the feasibility of the approach and to demonstrate the significance of the pre-identification results. This mainly involves predicting the control performance and optimizing the parameters of the control system. Combined with the simulation of the control system, the approach proposed can improve the work efficiency of large-scale engineering projects and reduce the cost of testing.

A 5-Stage Active Control Method with Online Secondary Path Modelling Using Decorrelated Control Signal

A Four-Stage Method For Active Control With Online Feedback Path Modelling Using Control Signal

Stochastic minimax semi-active control for MDOF nonlinear uncertain systems under combined harmonic and wide-band noise excitations using MR dampers

Improved 2-Order Active Disturbance Rejection Control for PMSM

An active noise control method of non-stationary noise under time-variant secondary path

AN ALGORITHM FOR ACTIVE CONTROL OF TRANSFORMER NOISE WITH ON-LINE CANCELLATION PATH MODELLING BASED ON THE PERTURBATION METHOD

Combining Data-Driven and Event-Driven for Online Learning Predictive Control in Power Converters

A Computation-efficient Online Secondary Path Modeling Technique for Modified FXLMS Algorithm

Improving Active Noise Control Without Secondary Path Modeling Using Subband Phase Estimation

A Time Domain Decentralized Algorithm for Two Channel Active Noise Control

Predicting the performance and optimizing the control parameters of an active vibration control system by pre-identifying the secondary path

Fast-transient repetitive controller based current control strategy for a cascaded DSTATCOM

Adaptive Learning-Based Path-Tracking Control for Unknown Vehicle Systems under Performance Optimization

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

ACOUSTIC FEEDBACK CANCELLATION OF ACTIVE NOISE CONTROL SYSTEMS WITH OPTIMIZED SECONDARY PATH

A Compensation Strategy for Parallel System of Modular Active Power Filter Based on Real-time Average Current

A Simplified Adaptive Feedback Active Noise Control System

A Simplified Subband ANC Algorithm Without Secondary Path Modeling

Sparse Modeling of Nonlinear Secondary Path for Nonlinear Active Noise Control

Modification of Frequency-Domain Active Noise Control Algorithm Without Secondary Path Modeling.

Speed-current composite loop SPMSM control based on ADR-SMC