Abstract:In an active vibration control (AVC) system, the secondary path can generally only be identified when the system has been built. The performance of a typical adaptive feedforward control system using the filtered-x least mean square (FxLMS) algorithm is heavily dependent upon the dynamic characteristics of the secondary path. It would, therefore, be helpful for engineers to have knowledge of this behavior early in the design process. In this paper, pre-identification of the secondary path is proposed, which means its offline identification model can be obtained without installing the AVC equipment. This can save both time and money. In the pre-identification process, the secondary path is split into three parts. The first part includes the actuator and related electrical equipment. The frequency response function of this part can be identified after the hardware has been selected. The second part involves the dynamic behavior of the structure to be controlled, which is identified by impact excitation using a specially developed pneumatic impact harmer. The third part concerns the analogue/digital and digital/analogue converters whose effect on the secondary path is offset by a phase shift corresponding to half the sampling time. In this paper, the pre-identification process of the secondary path components is described, and some experiments are conducted to verify the feasibility of the approach and to demonstrate the significance of the pre-identification results. This mainly involves predicting the control performance and optimizing the parameters of the control system. Combined with the simulation of the control system, the approach proposed can improve the work efficiency of large-scale engineering projects and reduce the cost of testing.

AN ALGORITHM FOR ACTIVE CONTROL OF TRANSFORMER NOISE WITH ON-LINE CANCELLATION PATH MODELLING BASED ON THE PERTURBATION METHOD

Power Transformer Noise Active Control Based on Genetic Radial Basis Wavelet Neural Network

A novel adaptive control algorithm for the rejection of harmonics in a standard vibrator

Research on Frequency-Selective Output Constraint Algorithm for Active Vibration Control

A Waveform Synthesis Algorithm for Active Control of Transformer Noise: Implementation

An adaptive sound intensity control algorithm for active control of transformer noise

A Modified Filtered-X Lms Algorithm for Active Control of Periodic Noise with On-Line Cancellation Path Modelling

Stochastic minimax semi-active control for MDOF nonlinear uncertain systems under combined harmonic and wide-band noise excitations using MR dampers

Active control of transformer noise with an internally synthesized reference signal

Efficient Model-Free Predictive Power Control for Active Front-End Modular Multilevel Converter

An Improved Harmonic Detection Based On Lead Compensation For Active Power Filter

A Novel Active Damping Method for LCL-filter-based Shunt Active Power Filter

A Broadband Active Control Algorithm Without Cancellation Path Modeling

An Enhanced Active Damping Control Method for <i>LCL</i>-Type Shunt APFs with Proportional-Resonant-Differential Inverter-Side Current Feedback

A Simple Model-Free Solution for Finite Control-Set Predictive Control in Power Converters

A 5-Stage Active Control Method with Online Secondary Path Modelling Using Decorrelated Control Signal

A Four-Stage Method For Active Control With Online Feedback Path Modelling Using Control Signal

Predicting the performance and optimizing the control parameters of an active vibration control system by pre-identifying the secondary path

Fast multiline spectral reshaping algorithm for active vibration control

An active noise control method of non-stationary noise under time-variant secondary path

Feedforward Active Noise Electronic Muffler Based on the H2 and H(subscript ∞) Controller Synthesis