Abstract:A two-dimensional (2D) cellular automaton (CA) model is proposed to simulate the ferrite-austenite transformation in binary low-carbon steels. In the model, the preferential nucleation sites of austenite, the driving force of phase transformation coupled with thermodynamic parameters, solute partition at the ferrite/austenite interface, and carbon diffusion in both the ferrite and austenite phases are taken into consideration. The proposed model is applied to simulate the ferrite-to-austenite transformation during isothermal heating at 760 degrees C that is in the ferrite and austenite two-phase range, the austenite-to-ferrite transformation during continuous cooling, and carbon diffusion during tempering at different temperatures for an Fe-0.2969 mol.% C alloy. The results show that during the isothermal heating, austenite nucleates and grows. The austenite grains are mostly located at the boundaries of ferrite grains. The carbon concentration in austenite is higher than that in ferrite. The simulated microstructure agrees reasonably well with the experimental observation. During the continuous cooling process, the austenite-to-ferrite transformation occurs accompanied with carbon diffusion. After cooling from the heating temperature of 760 degrees C to room temperature with a cooling rate of 2 degrees C/s, the carbon concentration field is nearly uniform, while a higher cooling rate of 5 degrees C/s results in a non-uniform carbon concentration field. After tempering at different temperatures for 20 min, the uniformity of carbon distribution increases with increasing tempering temperature. The simulation results are used to understand the mechanisms of the observed experimental phenomena that a cold-rolled low-carbon enameling steel presents different yield strengths after different heat treatment processes.

Multi-phase transformation kinetics of HSLA steels during continuous cooling: experiments and cellular automaton (CA) simulation

Modeling of Ferrite-Austenite Phase Transformation Using a Cellular Automaton Model

Modeling of Austenite Decomposition during Continuous Cooling Process in Heat Treatment of Hypoeutectoid Steel with Cellular Automaton Method

A Cellular Automaton Model Integrated with CALPHAD-based Thermodynamic Calculations for Ferrite-Austenite Phase Transformations in Multicomponent Alloys

Modeling of Ferrite‐Austenite Phase Transformation

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

The austenite to polygonal ferrite transformation in low-alloy steel: multi-phase-field simulation

Simulation of the Peritectic Phase Transition in Fe-C Alloys

Phase Field Simulation of Liquid-Solid-eutectoid Multiple Phase Transformations of a Fe-C Binary Alloy

CA MODELING OF PHASE TRANSFORMATION IN ASTM A216 WCA CAST STEEL DURING SOLIDIFICATION AND COOLING PROCESS

Kinetic Model for the Phase Transformation of High-Strength Steel under Arbitrary Cooling Conditions

Computer Simulations of Phase Transformation in Steels

A Cellular Automaton Approach to Modeling of Phase Transformation in Quenching of Steels

Modeling of the Precipitation Kinetics and Morphology Evolution of Lamellar Α in Ti-alloys During Non-Isothermal Treatments

In-situ Investigation of Phase Transformation Behaviors of 300M Steel in Continuous Cooling Process

Computation of Phase Fractions in Austenite Transformation with the Dilation Curve for Various Cooling Regimens in Continuous Casting

Kinetics and Microstructural Modeling of Isothermal Austenite-to-ferrite Transformation in Fe-C-Mn-Si Steels

In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels

Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel

Engineering Heterogeneous Multiphase Microstructure by Austenite Reverted Transformation Coupled with Ferrite Transformation

Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel