Abstract:As a powerful tool for monitoring and modulating neural activities, implantable neural electrodes constitute the basis for a wide range of applications, including fundamental studies of brain circuits and functions, treatment of various neurological diseases, and realization of brain-machine interfaces. However, conventional neural electrodes have the issue of mechanical mismatch with soft neural tissues, which can result in tissue inflammation and gliosis, thus causing degradation of function over chronic implantation. Furthermore, implantable neural electrodes, especially depth electrodes, can only carry out limited data sampling within predefined anatomical regions, making it challenging to perform large-area brain mapping. With excellent electrical, mechanical, and chemical properties, carbonbased nanomaterials, including graphene and carbon nanotubes (CNTs), have been used as materials of implantable neural electrodes in recent years. Electrodes made from graphene and CNT fibers exhibit low electrochemical impedance, benefiting from the porous microstructure of the fibers. This enables a much smaller size of neural electrode. Together with the low Young's modulus of the fibers, this small size results in very soft electrodes. Soft neural electrodes made from graphene and CNT fibers show a much-reduced inflammatory response and enable stable chronic in vivo action potential recording for 4-5 months. Combining different modalities of neural interfacing, including electrophysiological measurement, optical imaging/stimulation, and magnetic resonance imaging (MRI), could leverage the spatial and temporal resolution advantages of different techniques, thus providing new insights into how neural circuits process information. Transparent neural electrode arrays made from graphene or CNTs enable simultaneous calcium imaging through the transparent electrodes, from which concurrent electrical recording is taken, thus providing complementary cellular information in addition to high-temporal-resolution electrical recording. Transparent neural electrodes from carbon-based nanomaterials can record well-defined neuronal response signals with negligible light-induced artifacts from cortical surfaces under optogenetic stimulation. Graphene and CNT-based materials were used to fabricate MRI-compatible neural electrodes with negligible artifacts under high field MRI. Simultaneous deep brain stimulation (DBS) and functional magnetic resonance imaging (fMRI) with graphene fiber electrodes in the subthalamic nucleus (STN) in Parkinsonian rats revealed robust blood oxygenation level dependent responses along the basal ganglia-thalamocortical network in a frequency-dependent manner, with responses from some regions not previously detectable. This review introduces the recent development and application of neural electrode technologies based on graphene and CNTs. We also discuss biological safety issues and challenges faced by neural electrodes made from carbon nanomaterials. The use of carbon-based nanomaterials for the fabrication of various soft and multi-modality compatible neural electrodes will provide a powerful platform for both fundamental and translational neuroscience research.

Construction and Electrochemical Properties Determination of Carbon Nanotubes/porous-Network Carbon Micron Tubes/silk Fibroin Composite Film Neural Electrode

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Additional Anomalies in Hirschsprung's Disease: An Analysis Based on the Nationwide Survey in Japan

Nanofibrous PEDOT-Carbon Composite on Flexible Probes for Soft Neural Interfacing

Carbon Nanofiber/PEDOT Based Macro-Porous Composite for High Performance Multifunctional Neural Microelectrode

Soft and MRI Compatible Neural Electrodes from Carbon Nanotube Fibers.

Polymer Composite with Carbon Nanofibers Aligned During Thermal Drawing As a Microelectrode for Chronic Neural Interfaces.

Biocompatible conductive architecture of carbon nanofiber-doped chitosan prepared with controllable electrodeposition for cytosensing.

Superficial benign skin and subcutaneous lesions presenting in the head and neck

Implantable Fiber Biosensors Based on Carbon Nanotubes

Electrodeposition of alginate with PEDOT/PSS coated MWCNTs to make an interpenetrating conducting hydrogel for neural interface

Free-Standing Carbon Nanotube Embroidered Graphene Film Electrode Array for Stable Neural Interfacing

Carbon composite microelectrodes fabricated by electrophoretic deposition.

Carbon-Based Fiber Materials as Implantable Depth Neural Electrodes

A black plaque on the toe of a white male

In Vivo Electrochemical Analysis of a PEDOT/MWCNT Neural Electrode Coating

Construction and characterization of conductive collagen/multiwalled carbon nanotube composite films for nerve tissue engineering

Carbon-based Nanomaterials for Neural Electrode Technology

Bionanotube/Poly(3,4-ethylenedioxythiophene) Nanohybrid as an Electrode for the Neural Interface and Dopamine Sensor

Direct Electrodeposition of Graphene Enhanced Conductive Polymer on Microelectrode for Biosensing Application.

Chronic neural interfacing with cerebral cortex using single-walled carbon nanotube-polymer grids