Abstract:The lift force is an important component that affects the aerodynamic performance of bio-inspired flapping-wing micro aerial vehicles. However, there is a lack of endeavors in the optimization of the flapping wing parameters that affect the lift force of micro aerial vehicles. This research is therefore to establish a methodology that combines computational fluid dynamic simulation for the evaluation of the lift generation and wing parameters. The Taguchi’s framework for design of experiments, combined with the computational fluid dynamics simulations, is performed on a simplified robotic fly wing model used in the experiment found in Dickinson et al. (1999), under the hovering flight mode, to identify the most influential parameters on the lift generation of micro aerial vehicles. A commercial computational fluid dynamics code, ANSYS/FLUENT, along with a three-dimensional Navier–Stokes solver is used to simulate the unsteady flow field. With the optimization of the time-averaged lift force as the optimization objective, five typical parameters (flapping frequency, maximum angle of attacks during the upstroke and downstroke motions, stroke amplitude, and rotation type) in the flapping trajectory equation are selected as the input factors with each having four levels. Specific computational fluid dynamics cases are simulated in accordance with the chosen orthogonal arrays. By conducting statistical analyses with analyses of means and variance, the flapping frequency and the stroke amplitude are determined to be the two most influential parameters. The response surface of the time-averaged lift force and the power consumption contour are constructed with respect to these two parameters to determine the optimal combination for the generation of lift forces under a specific power constrain and provide a guideline for bio-inspired micro aerial vehicle designs.

Influences of Flapping Modes and Wing Kinematics on Aerodynamic Performance of Insect Hovering Flight

The Wing Kinematics Effects on Performance and Wake Structure Produced by Finite-Span Hovering Wings

Effect of the Wing Morphology and Structural Form on the Flexible Hovering Flapping Wing

Numerical investigation into the effects of stroke trajectory on the aerodynamic performance of insect hovering flight

Unsteady Aerodynamics and Wing Kinematics Effect in Hovering Insect Flight

Numerical Investigation on Aerodynamic Performance of a 2-D Inclined Hovering Wing in Asymmetric Strokes

Experimental Investigation on Aerodynamic Performance of Inclined Hovering with Asymmetric Wing Rotation

A comparative study of the hovering efficiency of flapping and revolving wings

Numerical Study of Two-Winged Insect Hovering Flight

Effect of Flapping Frequency on Aerodynamics of Wing in Freely Hovering Flight

Study of high aerodynamic lift mechanics of hovering insect flapping wing at low Reynolds number

Influence of area distribution along the span direction on flapping wing aerodynamics in hover based on numerical modelling analysis

Rotation Effects of 2-D Flapping Wing Motion in Hovering Flight

Aerodynamics of a Flapping-Perturbed Revolving Wing

Optimization of Lift Force for a Bio-Inspired Flapping Wing Model in Hovering Flight

Effect of wing inertia on hovering performance of flexible flapping wings

Sensitivity Analysis of Wing Geometric and Kinematic Parameters for the Aerodynamic Performance of Hovering Flapping Wing

Optimal Settings of Aerodynamic Performance Parameters in Hovering Flight

On the unsteady aerodynamics of flapping wings under dynamic hovering kinematics

Aerodynamic performance of a hovering hawkmoth with flexible wings: a computational approach

1133 the Effect of Wing Rotation Axis on the Aerodynamic Performance of a Flapping-Flying Insect a Numerical Study