Abstract:Excessive driving force applied to the trains leads to an inadequate utilization of the adhesion phenomenon occurred at the wheel–rail contact, and an unnecessary power consumption, while inadequate driving force causes the train to run inefficiently. For this reason, the necessity of re-adhesion control in the safe and reliable operation, in the balance of energy consumption, is indisputable. A comparison of the two re-adhesion control strategies, one of which is robust adaptive and the other of which is the modified super-twisting sliding mode, has been presented in this article. These control algorithms developed suppress the wheel slip on time and maintain optimal traction performance after re-adhesion under the nonlinear properties of the traction system and the uncertainties of the adhesion level at the wheel–rail interface. Due to the complex nonlinear relationship between the adhesion force and the slip angular velocity, such a problem becomes a hard problem to overcome as long as the optimal slip ratio is not known. An optimal search strategy has also been developed to estimate and to track the desired slip angular velocity. By means of the proposed strategies, the traction motor control torque is automatically adjusted so as to ensure that the train operates away from the unstable slip zone but adjacent to the optimal adhesion region, and the desired traction capability is attainable once adhesion is regained. Mathematical analyzes are also provided to ensure the ultimate boundedness of the algorithms developed. The effectiveness of the proposed re-adhesion strategies is validated through the theoretical analysis and numerical simulations conducted in MATLAB and Simulink. As a result of consecutive simulations, modified super-twisting algorithm has shown better performance as compared to the robust adaptive one in tracking the optimal slip velocity as wheel–rail contact conditions switch suddenly.

An Online Super-Twisting Sliding Mode Anti-Slip Control Strategy

A new discrete variable structure control algorithm based on sliding mode prediction

Anti-slip Optimization Control Strategy for High-Speed Train

Re-adhesion Optimization Control Strategy for Metro Traction

An Improved Adaptive Sliding Mode Control Approach for Anti-Slip Regulation of Electric Vehicles Based on Optimal Slip Ratio

A New Semi-Active Safety Control Strategy for High-Speed Railway Vehicles

Comparison of the re-adhesion control strategies in high-speed train

A 4-Phase Combined Adhesion Threshold Algorithm for Wheel Slide Protection Systems in Rail Vehicles

Research on the All-Wheel Steering Control Strategy for Multi-Axle Vehicles Based on Super-Twisting Sliding Mode Control

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Adaptive Sliding Controller with Self-Tuning Fuzzy Compensation for Vehicle Suspension Control

Advanced Maximum Adhesion Tracking Strategies in Railway Traction Drives

Anti-Lock Wheel Slip Control with an Adaptive Searching Algorithm for the Optimal Slip

An Anti-Slip Control Strategy with Modifying Target and Torque Reallocation for Heavy In-Wheel Motor Vehicle

Research on Anti-Skid Control Strategy for Four-Wheel Independent Drive Electric Vehicle

Research on Yaw Stability Control Strategy Based on Direct Slip Rate Allocation

Variable domain hybrid decision-based friction optimization control for train multi-wheelsets

Wheel Slip Control Using Sliding-Mode Technique and Maximum Transmissible Torque Estimation

Intelligent Driving Vehicle Trajectory Tracking Control Based on an Improved Fractional‐Order Super‐Twisting Sliding Mode Control Strategy

A Sliding Mode Control Scheme for Steering Flexibility and Stability in All-wheel-steering Multi-axle Vehicles

Super-twisting algorithm second-order sliding mode control for collision avoidance system based on active front steering and direct yaw moment control