Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Virtual track train (VTT) is a new urban public transportation system that adopts rubber wheel and rail transit management mode. Its characteristics of all-wheel-driving all-axle-steering (AWDAAS) enable this multi-articulated vehicle to run along the target path (virtual track) with high precision. This paper proposes a new traction guidance cooperative control strategy aiming at path-tracking and hinge forces optimisation. Firstly, the vehicle dynamics model is established using the two-step method, which mainly includes the centre of gravity (CG) forces model between the wheel steering angles, torques and the generalised forces at every unit. Secondly, the vehicle multi-body dynamics model is built with the CG generalised forces as the control input and carries on the concrete modelling for the three-unit six-axle AWDAAS-VTT. This modelling method can satisfy the rapid expansion and reconstruction according to the different marshalling numbers and axles. Then the hinge forces are analysed and expressed quantitatively by vehicle state and control inputs. A traction guidance cooperative control strategy based on a hierarchical framework is proposed, which has mainly three parts: the cooperative distribution of path-tracking and longitudinal speed targets, the CG generalised forces calculation of every unit based on improved model predictive control (MPC) and Stanley algorithm, and the control allocation (CA) of wheel torque and angle. The control strategy is verified by Co-simulation. The results show that the proposed control strategy can achieve excellent tracking accuracy and effectively reduce hinge forces. In addition, the vehicle under cooperative control also has excellent curve passing stability and continuous curve adaptability. The control strategy has high robustness under different running speeds, curve radii and payloads. Even under the extreme condition of passing through the R20 m curve at 14 m/s, the maximum tracking error is less than 0.035 m.

Advanced Maximum Adhesion Tracking Strategies in Railway Traction Drives

Re-adhesion Optimization Control Strategy for Metro Traction

Anti-slip Optimization Control Strategy for High-Speed Train

Comparison of the re-adhesion control strategies in high-speed train

Emergency Braking Control Strategy for High Speed Electric Drive Tracked Vehicle

Adhesion Control of Electric Locomotives Based on Machine Learning Rail Surface State Recognition

Freight train speed active disturbance rejection tracking and wheel anti-slip based on fuzzy neural network with DBO optimization

Maximum Adhesion Point Search Method of High-Speed Train Based on Fuzzy Logic

An Improved Adaptive Sliding Mode Control Approach for Anti-Slip Regulation of Electric Vehicles Based on Optimal Slip Ratio

Real-time estimation of the optimal longitudinal slip ratio for attaining the maximum traction force

Wheel Slip Control Using Sliding-Mode Technique and Maximum Transmissible Torque Estimation

Design of slip-based traction control system for EV and validation using co-simulation between Adams and Matlab/Simulink

A Human-optimized Model Predictive Control Scheme and Extremum Seeking Parameter Estimator for Slip Control of Electric Race Cars

Fast Detection of the Stick–Slip Phenomenon Associated with Wheel-to-Rail Sliding Using Acceleration Sensors: An Experimental Study

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Adaptive robust control with slipping parameters estimation based on intelligent learning for wheeled mobile robot

Integrated Model Predictive Control of High-Speed Railway Running Gears with Driven Independently Rotating Wheels

A Design Approach for Observer-based Robust Traction Control with PMSM

An experimental study on the effects of friction modifiers on wheel–rail dynamic interactions with various angles of attack

Research on traction guidance cooperative control of virtual track train based on path-tracking and articulation hinge forces optimisation

Disturbance-Observer-Based Terminal Sliding Mode Control for Linear Traction System With Prescribed Performance