Abstract:Dual-buck inverters feature some attractive merits, such as no reverse recovery issues of the body diodes and free of shoot-through. However, since the filter inductors of dual-buck inverters operate at each half cycle of the utility grid alternately, the inductor capacity of dual-buck inverters is twice as much as H-bridge inverters. Thus, the power density of dual-buck converters needs to be improved, as well as the conversion efficiency. In this paper, the detailed derivation process of two five-level full-bridge topology generation rules are presented and explained. One is the combination of a conventional three-level full-bridge inverter, a two-level capacitive voltage divider, and a neutral point clamped branch. The other method is to combine a three-level half-bridge inverter and a two-level half-bridge inverter. Furthermore, in order to enhance the reliability of existing five-level DBFBI topologies, an extended five-level DBFBI topology generation method is proposed. The two-level half-bridge inverter is replaced by a two-level dual-buck half-bridge inverter; thus, a family of five-level DBFBI topologies with high reliability is proposed. The operation modes, modulation methods, and control strategies of the series-switch five-level DBFBI topology are analyzed in detail. The power device losses of the three-level DBFBI topology and five-level DBFBI topologies, with different switching frequencies, are calculated and compared. Both the relationship between the neutral point potential self-balancing and the modulation index of inverters are revealed. A universal prototype was built up for the experimental tests of the three-level DBFBI topology, the five-level H-bridge inverter topology, and the existing three five-level DBFBI topologies. Experimental results have shown that the five-level DBFBI topologies exhibit higher efficiency than the five-level H-bridge inverter topology and the three-level DBFBI topology. As well, the higher power density has been achieved by the five-level DBFBI topologies compared with the three-level DBFBI topology.

High-Reliability Three-Phase Dual-Buck Grid-Connected Inverter Without Shoot-Through Problem

A Novel Hybrid Full-Bridge Inverter for Ultra-High Frequency Induction Heating Applications

Cascaded Half-Bridge Multilevel Inverter with Reduced Number of Power Switches

Topology derivation and control method of high‐reliability buck‐boost double‐grounded transformerless three‐phase inverters

Half-Cycle Control Method of the Bidirectional Three-Phase Dual-Buck Inverter Without Zero-Crossing Distortion

A Novel Dual Buck and Boost Transformer-Less Single-Phase Grid-Tied Inverter

A novel control method for dual mode time-sharing grid-connected inverter

A Family of Five-Level Dual-Buck Full-Bridge Inverters for Grid-Tied Applications

Cascade dual-buck full-bridge inverter with hybrid PWM technique

Dual-Buck Full-bridge Grid-connected Inverter Based on One-cycle Fixed Frequency Sliding Mode Control

Doubly grounded buck‐boost PV grid‐connected inverter without shoot‐through problem

Characteristic Analysis of the Grid-Connected Impedance-Source Inverter for PV Applications

A Novel Topology of Fault-Tolerant Three-Phase Four-Switch Grid-Connected Inverter Based on Space Vector Hysteresis Control

Zero-Voltage-Switching Single-Phase Full-Bridge Inverter With Active Power Decoupling

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

An Integrated Inverted and Non-Inverted Buck Converter

Three‐phase common‐ground‐type photovoltaic inverter without shoot‐through problem

A grid-connected hybrid cascaded H-bridge inverter

High Performance Hybrid Cascaded Inverter for Renewable Energy System

Topology and Control of Four-Quadrant Dual-DC-Port Dual-Buck Inverters For Semi-Two-Stage DC–AC Power Conversion

Control of High Efficiency Cascaded Photovoltaic Grid-connected Inverter