Abstract:Most large experiments for high energy particle physics are time measurement related, which requires a network supporting the broadcast communication in order to distribute the central clock to all endpoints. In addition to conventional solutions using a dedicated network just for time synchronization, several groups have proposed to embed the clock distribution network into the data stream network. Using only a single bidirectional fiber link for all network abilities, some special demands for these experiments, for example, limited space for hardware and long distance connection, can be satisfied. As the time resolution of detectors is constant increasing, the performance requirement for time synchronization based on this unified network is challenged. In this paper, we propose to use the state-of-art techniques on field programmable gate arrays (FPGA) and optical circulator based fiber connections to implement the unified network. By constructing a prototype system with three levels of hierarchical structure, the time synchronization performance is experimentally measured. Benefitting from the single wavelength fiber connection, high precision time-to-digital convertors (TDC), and phase interpolator (PI) components in FPGA SerDes transceivers, the clock offset of the distribution can be precisely measured and automatically compensated. Through multiple times of power-on and reset operation test, the clock synchronization accuracy over 5 km fiber connection is measured less than 40 ps. By employing the jitter cleaner devices in clock recovered endpoints, the recovered clock in different levels have independent jitter less than 4 ps. In addition, the achieved high performance is also proved to be insensitive to operation temperature and the connection distance. The test results show that the proposed implementation is a straight-forward and practical method with the high performance that can meet the requirements of most current large-scale experiments.

Performance Evaluation Of A Clock Synchronization Over Fiber Data Links For Large Experiments

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

Optical Amplification-Free High Baudrate Links for Intra-Data Center Communications

Reference Phase Stabilizer for Distributed Underwater Sonar Systems.

Power and time efficient clock synchronization in fiber channel

Fiber based time and frequency synchronization system

Dual-comb-enhanced microwave clock synchronization over commercial fiber

Time and Frequency Injection into a Stabilized Fiber Link for Multi-clock Dissemination Network

High-precision Joint Time and Frequency Transfer over a Fiber-optic Telecom Testbed

FPGA-based low-cost synchronized fiber network for experimental setups in space

Sub-ps Resolution Clock-Offset Measurement over a 114 Km Fiber Link Using Linear Optical Sampling.

Fiber-based Multiple Access Timing Signal Synchronization Technique

Real-Time Synchronization of Clocks at Femtosecond Level Through a 113 Km-Free-space Link

Long Distance Broadband Fiber Optical Beamforming over 120 Km

High-Precision Fiber Noise Detection and Comparison over a 260 km Field Fiber Link

Precise and Continuous Time and Frequency Synchronisation at the 5×10-19 Accuracy Level

Method of Fiber Transfer Delay Measurement Based on Phase Quantization and Delay Synthesis

High precise time delay measurement in optical fiber

Enabling a multifunctional telecommunications fiber optic network: Ultrastable optical frequency transfer and attosecond timing in deployed multicore fiber

Calibration of Fiber-Optic Time Synchronization System over 800Km

Clock-offset Measurement over a 50 Km Nonreciprocal Fiber Link with Linear Optical Sampling