Abstract:CoCrNi medium-entropy alloy (MEA) exhibits exceptional damage-tolerance, particularly at cryogenic temperatures, but demonstrates poor wear resistance. In this study, we propose a strategy to significantly reduce friction and wear of CoCrNi MEA film through the introduction of massive interstitial carbon-induced amorphization. The microstructure of as-sputtered CoCrNi film reveals an anisotropic columnar nanograin structure, featuring a primary face-centered-cubic (fcc) phase and a minor hexagonal-close-packed (hcp) phase. Upon the introduction of 16 at. % interstitial carbon (CoCrNi-C), a remarkable phase transformation occurs, resulting in an isotropic amorphous structure. Under low-load and low-sliding-velocity conditions, the CoCrNi-C film exhibits a 21% reduction in coefficient of friction (CoF) and 17% reduction in wear rate. More notably, when subjected to higher loads and sliding velocities, the CoCrNi film experiences rapid failure within the initial 100 cycles, manifesting as microcracks, breakage, and peeling. In contrast, the amorphous CoCrNi-C film demonstrates remarkable durability, sustaining over 5000 cycles without failure. The wear rate exhibits a negative correlation with load but a positive correlation with sliding velocity. This enhanced wear resistance can be attributed to the amorphous nature of the CoCrNi-C film, which inhibits local strain accumulation, preventing strain localization that typically leads to crack initiation and propagation in the CoCrNi film. Additionally, the formation of a protective oxide layer contributes to the improved wear resistance of CoCrNi-C film under higher loads and lower sliding velocities. This study provides valuable insights into the design of wear-resistant CoCrNi-based MEA coatings through massive interstitial carbon-induced amorphization.

Significantly Enhanced Wear Resistance of an Ultrafine-Grained CrFeNi Medium-Entropy Alloy at Elevated Temperatures

Sliding Wear of CoCrNi Medium-Entropy Alloy at Elevated Temperatures: Wear Mechanism Transition and Subsurface Microstructure Evolution

Tribo-induced microstructural changes and associated wear mechanisms of CoFeNi 2 medium entropy alloy at elevated temperatures

The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures

Significantly Lowering Friction and Wear of CoCrNi Medium-Entropy Alloy Film Via Massive Interstitial Carbon-Induced Amorphization

Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy

Friction-induced rapid amorphization in a wear-resistant (CoCrNi) 88 Mo 12 dual-phase medium-entropy alloy at cryogenic temperature

Sliding Wear of Nanocrystalline Nb-Ag at Elevated Temperatures: Evolution of Subsurface Microstructure and Its Correlation with Wear Performance

Effects of Ni/MoS2, Ag and Cr2O3 on the Microstructure and Mechanical Performance of a CoCrFeNi High-Entropy Alloy over a Wide Temperature Range

An exceptionally wear-resistant CoFeNi 2 medium entropy alloy via tribo-induced nanocrystallites with amorphous boundaries

On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature

Mechanical Properties and Tribological Behavior of Al0.5CoCrFeNb0.5Ni High-Entropy Alloy at High Temperatures

Mechanical properties and deformation mechanisms of a Ni2Co1Fe1V0.5Mo0.2 medium-entropy alloy at elevated temperatures

High-Temperature Oxidation Properties of Economical and Lightweight Fe-Cr-Ni-Al Medium-Entropy Alloy

Friction and wear behavior of a precipitation-hardened equiatomic FeCrNi medium entropy alloy unraveled by molecular dynamics simulation

Sliding Wear Behavior of a Laves Phase-Strengthened CrFeNiNb0.158 Alloy at Room and Elevated Temperatures

Synergetic Enhancements on the Mechanical and Tribological Performance of Al10Cr17Fe20NiV4 Medium‐Entropy Alloys Induced by Nano‐Al2O3 Particles

Microstructure, Mechanical Property, and Wear Behavior of NiAl-Based High-Entropy Alloy

Room and Elevated Temperature Sliding Friction and Wear Behavior of Al0.3CoFeCrNi and Al0.3CuFeCrNi2 High Entropy Alloys

Molecular Dynamics Study on Wear Resistance of High Entropy Alloy Coatings Considering the Effect of Temperature

Temperature-dependent mechanical behavior of an Al 0.5 Cr 0.9 FeNi 2.5 V 0.2 high-entropy alloy