Abstract:In this paper, novel syntactic foams (CPSFs) composed of the rigid polyurethane foam (PUR) and the fly ash cenospheres were prepared through the pressure infiltration approach. The aluminum honeycombs were proposed to improve the mechanical response of CPSFs by internally restricting the lateral deformation. The influences of the cenospheres size and the reinforcement on the dynamic behavior of the CPSFs were specified. The dynamic compression tests were carried out for the plain and Al honeycomb reinforced CPSFs with the strain rate ranging from 0.001/s to 2000/s. The results shown that the dynamic strength of the CPSFs containing large cenospheres was 35%–77% higher than that under quasi-static compression. But, the plateau stress was insensitive to the strain rate because the main failure mechanism of the CPSFs at different stages was dominated by different material compositions. The dynamic compressive strength and plateau stress of the plain CPSFs containing small cenospheres shown obvious strain rate sensitivity. The failure mechanism of the two plain CPSFs both transformed from shear failure into longitudinal cracking with the loading condition changed from the quasi-static to high-velocity impact. For the reinforced CPSFs, the dynamic mechanical properties including the strength and the plateau stress were sensitive to the strain rate. The failure mode of the reinforced CPSFs was dominated by the gradual compressive deformation. It was suggested that the Al honeycombs can not only enhance the mechanical properties, but also improve the dynamic response of the CPSFs. As a consequence, the dynamic energy absorption of the CPSFs varied in the range of 7–14 MJ/m3, and was about 23%–32% higher than that under static compression. This study expects to provide a potential approach in disposing the industrial waste and an innovation to adopt the internal constraints to improve mechanical behaviors of syntactic foams.

Compressive Response of Composite Ceramic Particle-Reinforced Polyurethane Foam

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Microstructure of Ceramic Foams

Study of stress wave attenuation characteristics of particle ceramic embedded polyurethane composites

Giant Cushioning Effect in Facile Polymer/Nanoclay-Coated Flexible Polyurethane Foams

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Modelling the dynamic compressive response of syntactic foam with hierarchical cell structure

Compression Behavior and Energy Dissipation of Aluminum Foam-Polyurethane Elastomer Composite Materials under Impact Loading

Mechanical strength of highly porous ceramic foams with thin and lamellate cell wall from particle-stabilized foams

Effect of the cenospheres size and internally lateral constraints on dynamic compressive behavior of fly ash cenospheres polyurethane syntactic foams

An Experimental Investigation of the Dynamic Mechanical Behaviors of Hollow Spheres Filled Syntactic Foam

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Synergistic effect of silica aerogels and hollow glass microspheres on microstructure and thermal properties of rigid polyurethane foam

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Quasi-static and dynamic mechanical responses of hybrid laminated composites based on high-density flexible polyurethane foam

Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels

Mechanical Performance and Cushioning Energy Absorption Characteristics of Rigid Polyurethane Foam at Low and High Strain Rates

Influence of quartz and marble on the performance of particulate-filled rigid polyurethane foams

Effect of Fiber Content on Sound Absorption, Thermal Conductivity, and Compression Strength of Straw Fiber-filled Rigid Polyurethane Foams

Quasi-static and High Strain Rates Compressive Behavior of Aluminum Matrix Syntactic Foams

Interpenetrating Phase Composite Foam Based on Porous Aluminum Skeleton for High Energy Absorption