Abstract:The organic-inorganic metal halide perovskite materials have excellent optical and electrical properties such as high absorption coefficient, high carrier mobility, long carrier lifetime, tunable bandgap, facile fabrication process, etc. Owing to the above excellent properties, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has increased significantly from 3.8% to 22.1% in the last few years. The PSCs have attracted intensive interest in recent years and show great commercial potential. Previous approaches to increasing the PCE of PSCs have focused on the optimization of the morphology of perovskite film. However, there are relatively few studies on the electron transport layer (ETL) in the typical p-i-n sandwiched structure. In this work, the PCE of PSCs with device structure of ITO/PEDTO: PSS/CH3NH3PbI3 /PCBM/Al is improved from 10.8% to 12.5% by using polystyrene (PS) and 1,8-diiodooctane (DIO) as binary additives during the deposition of phenyl-C61-butyric acid methyl ester (PCBM) layer. With the addition of PS, a highly smooth and uniform PCBM ETL is formed due to the increase of viscosity. The morphologies of the PCBM films prepared with and without PS are analyzed using an atomic force microscope in the tapping mode. The root-mean-square surface roughness decreases from 1.270 to 0.975 nm with the addition of PS increasing, which is more effective in preventing electron and hole from recombining at the interface between the perovskite layer and the top electrode. Addition of DIO improves the morphology of PCBM, which plays an important role in charge dissociation, charge transportation, and charge collection. From the time-resolved photoluminescence decay curves of ITO/CH3NH3PbI3/PCBM (with different additives), it is clear to conclude that the exciton dissociation between the perovskite layer and PCBM layer is faster and faster. Electrons and holes can be quickly separated, indicating that charge transport performances of electron transport layer with the addition DIO turn better. The addition of two additives is a simple and low-cost approach to improving the morphology of the electron transport layer, which provides a path-to the further improvement of the performance of p-i-n PSCs.

Tuning Surface Wettability of Buffer Layers by Incorporating Polyethylene Glycols for Enhanced Performance of Perovskite Solar Cells.

Improved Crystallinity and Self-Healing Effects in Perovskite Solar Cells Via Functional Incorporation of Polyvinylpyrrolidone

Influence of Phenyl-C61-Butyric Acid Methyl Ester (pcbm) Electron Transport Layer Treated by Two Additives on Perovskite Solar Cell Performance

Interfacial Engineering Based on Polyethylene Glycol and Cuprous Thiocyanate Layers for Efficient and Stable Perovskite Solar Cells

A trifunctional polyethylene oxide buffer layer for stable and efficient all-inorganic CsPbBr 3 perovskite solar cells.

Enhancing Efficiency and Stability of Perovskite Solar Cells Via a High Mobility P-Type PbS Buffer Layer

Perovskite Solar Cells Based on the Synergy Between Carbon Electrodes and Polyethylene Glycol Additive with Excellent Stability

Poly(Ethylene Glycol) Diacrylate as the Passivation Layer for High-Performance Perovskite Solar Cells

Interfacial Dipole Poly(2-ethyl-2-oxazoline) Modification Triggers Simultaneous Band Alignment and Passivation for Air-Stable Perovskite Solar Cells

Efficient Passivation with Lead Pyridine‐2‐Carboxylic for High‐Performance and Stable Perovskite Solar Cells

Increasing the wettability and reducing excess PbI2 using diamine hydrobromides with different lengths at the buried interface of the 3D perovskite film

Achieving Efficient and Stable Organic Solar Cells by Using Polyethylene Glycol to Modulate the Crystallization and Distribution of the Active Layer

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Nonconjugated Polymer Poly(vinylpyrrolidone) As an Efficient Interlayer Promoting Electron Transport for Perovskite Solar Cells.

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Reducing energy loss and stabilising the perovskite/poly (3-hexylthiophene) interface through a polyelectrolyte interlayer

Smoothed Grain Boundary Grooves, Passivated Defects and Released Compressive Stresses Via Bulk Molecule Doping for Efficient Perovskite Solar Cells

Synergistically Stabilizing Hole Transport Layer and Dual Interface Enables High-Performance Perovskite Solar Cells

Polyethylene glycol dodecyl ether as interfacial modifier for improving efficiency of perovskite solar cells

Zn0.8Cd0.2S@PCBM Hybrid As an Efficient Electron Transport Layer for Air‐Processed P‐i‐n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells