Abstract:It is a formidable challenge to simultaneously achieve wide gamut, high resolution, high-speed while low-cost manufacturability, long-term stability, and viewing-angle independence in structural colors for practical applications. The conventional nanofabrication techniques fail to match the requirement in low-cost, large-scale and flexible manufacturing. Processing by ultrashort lasers can achieve extremely high throughput while suffering from a narrow gamut of 15% sRGB or angle-dependent colors. Here, we demonstrate an all-in-one solution for ultrafast laser-produced structural colors on ultrathin hybrid films that comprise an absorbent TiAlN layer coating on a metallic TiN layer. Under pulsed laser irradiation, the absorption behaviors of the TiAlN-TiN hybrid films are tailored by photothermal-induced oxidation on the topmost TiAlN. The oxidized films exhibit double-resonance absorption, which is attributed to the non-trivial phase shifts both at the oxide-TiAlN interface, and at the TiAlN-TiN interface. By varying the accumulated laser fluence to modulate the oxidation depth, an unprecedented large gamut of 90% sRGB is obtained. Our highly reproducible printing technique manifests angle-insensitive colors the variation of Hue is <0.14pi when viewing angles changing from 6 to 60. The full-color printing speed reaches to 1.4 cm2/s and the highest printing resolution exceeds 25000 dpi. The durability of the laser-printed colors is confirmed by fastness examination, including salt fog, double-85, light bleaching, and adhesion tests. These features render our technique to be competitive for high-throughput industrial applications.

Direct Color Printing with an Electron Beam

Single-color Peripheral Photoinhibition Lithography of Nanophotonic Structures

Recording Messages on Nonplanar Objects by Cryogenic Electron‐Beam Writing

Grayscale Color 3D/4D Printing Via Orthogonal Photochemistry

Laser Direct Writing Using Submicron-Diameter Fibers.

Subwavelength-resolution Direct Writing Using Submicron-Diameter Fibers

Full-Spectrum Flexible Color Printing at the Diffraction Limit

CO2‐Based Dual‐Tone Resists for Electron Beam Lithography

Solution-processable multi-color printing using UV nanoimprint lithography

Multi-step exposure method for improving structure flatness in digital light processing-based printing

Stacking of Colors in Exfoliable Plasmonic Superlattices.

High-resolution 3D Nanoprinting Based on Two-Step Absorption Via an Integrated Fiber-Coupled Laser Diode.

Development of electron beam lithography technique for large area nano structural color

Dynamic Color Displays Using Stepwise Cavity Resonators

Grayscale Electron Beam Lithography Direct Patterned Antimony Sulfide

Painting with Hue, Saturation, and Brightness Control by Nanoscale 3D Printing

Combining thermal scanning probe lithography and dry etching for grayscale nanopattern amplification

Colloidal Quantum Dot Nanolithography: Direct Patterning via Electron Beam Lithography

Three-Dimensional Printing of Structural Color Using a Femtoliter Meniscus

Direct electron beam patterning of electro-optically active PEDOT:PSS

High-speed laser writing of structural colors for full-color inkless printing