Abstract:It is vital to explore sustainable and highly efficient catalysts for the oxygen reduction reaction (ORR) with increasing energy demand. Herein, a cobalt (Co) atom dispersed on an N-doped carbon nanosphere catalyst (denoted as ) was designed and constructed by a simple precursor-engineering method. The regulation of heteroatoms and Co metal atoms in precursors introduces more defects and thus reduces the degree of graphitization in the catalyst. The high N content of 5.23 at% in the catalyst provides abundant N sites to anchor metallic Co atoms, which further increases the defects for enhanced catalytic activity. The obtained with an ultralow loading of Co (only 0.041 wt %) exhibits an onset potential of 1.05 V, a limited-diffusion current density of 4.74 mA/cm<sup>2</sup>, and a half-wave potential of 0.79 V for the ORR under alkaline conditions, comparable to those of commercial Pt/C (1.06 V, 4.58 mA/cm<sup>2</sup>, and 0.81 V, respectively). Therefore, the synergistic effect of heteroatoms and Co metal atoms is beneficial for tuning the carbon matrix defects, which leads to the improvement of ORR activity. The Koutecky–Levich equation and rotating ring-disk electrode tests reveal a complete four-electron oxygen reduction pathway, impeding hydrogen peroxide generation. Moreover, nearly 93.8% of the current is retained for after 10 h stability testing without any morphological structural collapse. Meanwhile, it demonstrates superior tolerance to methanol. Our discovery opens a door to engineering the defects of carbon catalysts through introducing ultralow loading of non-noble metal atoms on substrates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03197?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03197</a>.**Polarization curves of catalysts for temperature regulation; TEM and HAADF-STEM graphs; TGA curves of catalysts; XRD and Raman analysis of ECo-900; XPS C1s spectra of catalysts; additional cyclic voltammogram and LSV data; stability testing data; methanol resistance testing data; K–L plots and electron number; cycling performance of Zn-air equipped battery data; and element analysis results (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03197/suppl_file/ae0c03197_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting Carbon Dioxide Electroreduction to C1 Feedstocks Via Theory-Guided Tailoring Oxygen Defects in Porous Tin-Oxide Nanocubes

Modulating Activity through Defect Engineering of Tin Oxides for Electrochemical CO2 Reduction

Surface Oxygen Injection in Tin Disulfide Nanosheets for Efficient CO2 Electroreduction to Formate and Syngas

Controlled Preparation of Cross-Linked SnO 2 Hollow Nanotube Networks for Electrocatalytic CO 2 Reduction

Densely Packed, Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Boosting Industrial-Level CO<sub>2</sub> Electroreduction of N-Doped Carbon Nanofibers with Confined Tin-Nitrogen Active Sites via Accelerating Proton Transport Kinetics

Synergistic oxygen vacancy and Zn-doping on SnO2 nanosheets for enhanced electrochemical CO2 conversion

Tailoring microenvironment for enhanced electrochemical CO 2 reduction on ultrathin tin oxide derived nanosheets

Nanoconfined Tin Oxide Within N-Doped Nanocarbon Supported on Electrochemically Exfoliated Graphene for Efficient Electroreduction of CO2 to Formate and C1 Products.

Controlled Preparation of Cross-Linked SnO2 Hollow Nanotube Networks for Electrocatalytic CO2 Reduction

Low Overpotential Electroreduction of CO2 on porous SnO2/ZnO Catalysts

Tuning Oxygen Vacancies of Oxides to Promote Electrocatalytic Reduction of Carbon Dioxide

Coupled Metal/Oxide Catalysts with Tunable Product Selectivity for Electrocatalytic CO2 Reduction

Interfacial engineering of SnO2/Bi2O2CO3 heterojunction on heteroatoms-doped carbon for high-performance CO2 electroreduction to formate

Surface Modification of SnO2 Nanosheets Via Ultrathin N-doped Carbon Layers for Improving CO2 Electrocatalytic Reduction

Sub-5 nm SnO2 chemically coupled hollow carbon spheres for efficient electrocatalytic CO2 reduction

Exploring Oxygen Vacancy Effect in 1D Structural SnIP for CO2 Electro-Reduction to Formate

Oxidation State Modulation of Bimetallic Tin-Copper Oxide Nanotubes for Selective CO2 Electroreduction to Formate

Selective Electroreduction of Carbon Dioxide over SnO2-Nanodot Catalysts

Interfacial engineering of SnO<sub>2</sub>/Bi,O<sub>2</sub>CO<sub>1</sub> heterojunction on heteroatoms-doped carbon for high-performance CO<sub>2</sub> electroreduction to formate

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction