Impact mechanism of double injection on the combustion and emission characteristics of n-butanol/diesel dual fuel direct injection engine
Manyao Xie,Ying Wang,Yuanqi Bai
DOI: https://doi.org/10.1016/j.seta.2024.103861
IF: 7.632
2024-06-19
Sustainable Energy Technologies and Assessments
Abstract:For dual fuel direct injection (DFDI) engine, the impact mechanism of injection parameters in double injection strategy still needs to be further studied. Thus, in this study, CFD simulations were conducted to investigate the impact mechanism of double diesel injection timing (F INJD , S INJD ) and first diesel energy ratio (FDER). Besides, the correlation among injection parameters, the combustion and emission characteristics was also investigated. As a sustainable and renewable biofuel, n-butanol was applied in this study and its energy ratio reached up to 60 %. Results show that, earlier F INJD increased wall-wetting phenomenon. When F INJD = 60°CA BTDC, PRR max , emissions as well as indicated thermal efficiency (ITE) could be well balanced. Advancing S INJD would reduce mixing-controlled combustion. Compared to S INJD = 20°CA BTDC, as S INJD = 28°CA BTDC, PRR max , ITE and NO emission increased by 21.3 %, 2.96 % and 53.97 %, respectively. Increasing FDER promoted low-temperature combustion reactions. As FDER increased from 10 % to 90 %, HRR max and PRR max increased by 84.7 % and 23.1 %, respectively. In addition, correlation analysis revealed that F INJD had significant impact on HRR max and ITE, while S INJD had a greater impact on combustion phase, PRR max , P max , T max , and soot emission. However, FDER showed a weaker correlation with combustion and emissions.
energy & fuels,green & sustainable science & technology