Experimental investigation on the characteristics of ternary blended fuel using Artocarpus heterophyllus peel: a sustainable fuel for gasoline engine applications
Raghavan Ashwin,Thangavelu MohanRaj
DOI: https://doi.org/10.1007/s13399-024-06035-w
IF: 4.05
2024-08-27
Biomass Conversion and Biorefinery
Abstract:There is fierce competition to develop an alternative fuel that is environmentally benign and less destructive due to the detrimental impact of utilising existing engine fuels on global warming and climate change. Mixing alcohol fuel with engine-designed fuel was shown to be very practical. The bioethanol is produced from Artocarpus heterophyllus peel. The current study combined butanol–ethanol with gasoline in three ratios: 10% butanol–ethanol + 90% gasoline (BEG10), 20% butanol–ethanol + 80% gasoline (BEG20), and 30% butanol–ethanol + 70% gasoline (BEG30). The impact of the butanol–ethanol/gasoline mix on performance and emission characteristics was investigated and analysed using a four-stroke, one-cylinder, spark-ignition engine. In the engine speed range of 2500 to 4500 rpm, three test fuels (BEG10, BEG20, and BEG30) were investigated. The response surface technique regression models were created, and the experimental data were compared with the model's ability to forecast output characteristics such as brake thermal efficiency and brake-specific fuel consumption. The found model was used to optimise the input parameters of speed, load, and blend. The obtained R 2 (0.9712) value showed that the response surface technique model produced was more accurate, and genetic algorithms were used in the optimisation process. Brake thermal efficiency (42.46%) and brake-specific fuel consumption (0.23 kg/kWh) were the best feasible answers determined by the response surface approach. The results demonstrated that higher ethanol–butanol concentrations enhance brake power ( B P ), brake-specific fuel consumption ( B SFC ), and brake thermal efficiency ( B TE ). Moreover, ethanol decreases toxic exhaust gases in the gasoline engine. Ultimately, the butanol–ethanol mixture with petrol showed a reduction in engine emissions and simultaneously an increase in performance characteristics, respectively. Higher gasoline–butanol–ethanol mix rates, on the other hand, improved the spark ignition engine's performance characteristics. Thereby, without requiring engine changes, the BEG30 mix delivers higher performance characteristics like B TE and B SFC and lower emissions like C a H b , CO, and NO compared to previous BEG blends.
energy & fuels,engineering, chemical