Abstract:In a conventional scheme of a Brillouin Optical Time Domain Reflector (BOTDR), an electro-optic modulator (EOM) or an acoustic optical modulator (AOM) is generally utilized to modulate the continuous light into the pulse probe light. However, the fluctuation of the working point will result in the instability of the extinction ratio when an EOM is selected, and a slow modulation speed will bring about the inability of modulating a narrow pulse when an AOM is chosen. In view of the above issue, a scheme for stably modulating the pulse probe light based on a semiconductor optical amplifier (SOA) is proposed. Meanwhile, the scheme integrates a pulse signal source with a synchronous trigger output to simplify the hardware structure of the system. Firstly, a SOA optic pulse modulator is used in the optic link to produce the pulse probe light into the sensing fiber, and coherent detection is used to obtain the beat signal of the Brillouin scattering. Moreover, the microwave frequency-sweeping method is adopted to acquire the variation curves of power with the fiber length at different frequency points. Then, the Brillouin Frequency Shift (BFS) distribution along the sensing fiber can be figured out by processing the acquired original data. Specially, in order to speed the data process, a software kernel of underlying Levenberg-Marquardt algorithm is developed based on C language, and the MFC message response mechanism and multi-thread characteristics are used to build a man-machine interface. Finally, the strain distribution along the fiber can be calculated based on the proportionality coefficient of BFS change versus strain change. The experiment results show that the BFS measurement accuracy of +/- 3.74 MHz is achieved over a 10.7-kilometer sensing fiber with the spatial resolution of 1.2 m, meanwhile the data processing time is reduced by about 45 times compared to that when using the LabVIEW, which indicates the stable and fast BFS measurement is realized.

Managing Brillouin Frequency Spacing for Temperature Measurement with Brillouin Fiber Laser Sensor

Triple Brillouin Frequency Spacing Brillouin Fiber Laser Sensor for Temperature Measurement

Multiwavelength Single-Longitudinal-Mode Brillouin–Erbium Fiber Laser Sensor for Temperature Measurements with Ultrahigh Resolution

Brillouin Fiber Laser Sensors

Compact Two Wavelength Brillouin Fiber Laser Sensor with Double Brillouin Frequency Spacing

Temperature Sensing Using Four-Wavelength Fabry–Pérot Brillouin–erbium Fiber Laser by Low Frequency Detection

Stimulated Brillouin scattering slow-light-based fiber-optic temperature sensor.

Fiber‐optic sensing scheme based on high‐order Stimulated Brillouin scattering in a fiber ring and frequency down‐conversion

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Multiwavelength Brillouin–Erbium Fiber Laser Temperature Sensor with Tunable and High Sensitivity

A Fiber Laser Temperature-Sensing System with Customizable Sensitivity Based on Beat Frequency Demodulation Method

Optomechanically Mode-Locked Laser Sensor for High Accuracy Temperature Measurement

Brillouin Temperature Sensing System Based on a High-precision Demodulation Method

Fiber-Optic Temperature Sensing Scheme By Using Stimulated Brillouin Scattering Effect In A Recirculating Fiber Ring

Temperature and Refractive Index Measurement Using an Optical Fiber Sensor Featuring PCF-FP and FBG Inscribed by Femtosecond Laser

Temperature measurement based on Brillouin and Rayleigh scattered light beat frequencies

Flat Multi-Wavelength Brillouin Erbium-Doped Fiber Laser Based on a Sagnac Loop for High-Sensitivity Sensor

High-Sensitivity Distributed Temperature Sensor Based on Brillouin Scattering With Double-Coated Single-Mode Fibers

A Parallel Multiplexed Temperature Sensor System Using Bragg-Grating-Based Fiber Lasers

A Stable And Fast Approach For Measuring Brillouin Frequency Shift

Optical fiber temperature sensor with mK resolution and absolute frequency reference