Abstract:Turbine blisk low cycle fatigue (LCF) is affected by various factors such as heat load, structural load, operation parameters and material parameters; it seriously influences the reliability and performance of the blisk and aeroengine. To study the influence of thermal-structural coupling on the reliability of blisk LCF life, the generalized regression extreme neural network (GRENN) method was proposed by integrating the basic thoughts of generalized regression neural network (GRNN) and the extreme response surface method (ERSM). The mathematical model of the developed GRENN method was first established in respect of the LCF life model and the ERSM model. The method and procedure for reliability and sensitivity analysis based on the GRENN model were discussed. Next, the reliability and sensitivity analyses of blisk LCF life were performed utilizing the GRENN method under a thermal-structural interaction by regarding the randomness of gas temperature, rotation speed, material parameters, LCF performance parameters and the minimum fatigue life point of the objective of study. The analytical results reveal that the reliability degree was 0.99848 and the fatigue life is 9419 cycles for blisk LCF life when the allowable value is 6000 cycles so that the blisk has some life margin relative to 4500 cycles in the deterministic analysis. In comparison with ERSM, the computing time and precision of the proposed GRENN under 10,000 simulations is 1.311 s and 99.95%. This is improved by 15.18% in computational efficiency and 1.39% in accuracy, respectively. Moreover, high efficiency and high precision of the developed GRENN become more obvious with the increasing number of simulations. In light of the sensitivity analysis, the fatigue ductility index and temperature are the key factors of determining blisk LCF life because their effect probabilities reach 41% and 26%, respectively. Material density, rotor speed, the fatigue ductility coefficient, the fatigue strength coefficient and the fatigue ductility index are also significant parameters for LCF life. Poisson's ratio and elastic modulus of materials have little effect. The efforts of this paper validate the feasibility and validity of GRENN in the reliability analysis of blisk LCF life and give the influence degrees of various random parameters on blisk LCF life, which are promising to provide useful insights for the probabilistic optimization of turbine blisk LCF life.

Pressure Drop Analysis and Prediction of Wind Power Stations Lubrication System Based on CFD and GRNN

Comparison of GRNN and RF Algorithms for Predicting Heat Transfer Coefficient in Heat Exchange Channels with Bulges

A novel wind power prediction method of the lower upper bound evaluation based on GRU

CFD and Neural Network-Based Predicting for Oil Delivery Performance of Oil Pump in Engines

Predicting Airflow Distribution in A Radially Air-Cooled Generator by Flow Network Method

Wind Turbine Gearbox Failure Identification With Deep Neural Networks

Predicting wind pressures around circular cylinders using machine learning techniques

Reliability-Based Low Fatigue Life Analysis of Turbine Blisk with Generalized Regression Extreme Neural Network Method

Numerical Analysis and Artificial Neural Network-Based Prediction of Two-Phase Flow Pressure Drop of Refrigerants in T-junction

Evaluation Analysis of Prediction Methods for Pressure Drop of Refrigerant-Lubricant Two-Phase Flow in Compressor Suction Lines

Research on Prediction Model of Two-Phase Flow and Friction Pressure Drop in Spiral Pipe Based on Flow Regimes

A Computational Fluid Dynamic-Based Method for Analyzing the Nonlinear Relationship Between Windage Loss and Pressure in a Geotechnical Centrifuge

Prediction of Cattaneo–Christov heat flux with thermal slip effects over a lubricated surface using artificial neural network

A Robust Predictive Technique for the Pressure Drop During Condensation in Inclined Smooth Tubes

Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact

Prognosis of the Remaining Useful Life of Bearings in a Wind Turbine Gearbox

Interval Forecast Method for Wind Power Based on GCN-GRU

Prediction of Remaining Useful Life of Wind Turbine Bearings under Non-Stationary Operating Conditions

Lubrication Oil Condition Monitoring and Remaining Useful Life Prediction with Particle Filtering

Machine learning-based models for frictional pressure drop prediction of condensing and adiabatic flow in micro, mini and macro channels utilizing universal data

Usage of correlation analysis and hypothesis test in optimizing the gated recurrent unit network for wind speed forecasting