Microalgae Dewatering Using a Hybrid Dead-End/cross-flow Forward Osmosis System: Influence of Microalgae Properties, Draw Solution Properties, and Hydraulic Conditions

Cong Ma,Jingyun Huang,Liang Wang,Bin Zhao,Zhaohui Zhang,Hongwei Zhang
DOI: https://doi.org/10.1016/j.algal.2020.101899
IF: 5.276
2020-01-01
Algal Research
Abstract:The high energy input required for microalgae dewatering makes biodiesel production economically unfeasible. Forward osmosis, as an energy-efficient method, has gained increasing attention. However, the biomass moisture content obtained by traditional forward osmosis is relatively high, which has a negative influence on the downstream process. In this study, a hybrid dead-end/cross-flow forward osmosis system was proposed for microalgae dewatering. The influence of microalgae properties (microalgae species and culture pH), draw solution properties (draw solution concentration and draw solution type), and hydraulic conditions (stirring speed and cross-flow velocity) on the water flux, flux recovery rate, and moisture content were investigated. The results showed that the algal biomass moisture content could be significantly reduced by increasing the draw solution concentration. Specifically, 1 g/L of Chlorella vulgaris could obtain a moisture content of 71.82% when the draw solution concentration was 5 M with a high initial water flux of 15.55 L m(-2).h(-1) and a high flux recovery rate of 97.00%. The scanning electron microscope images and Fourier transform infrared spectroscopy results revealed that foulants on the membrane could be easily removed by physical cleaning. This study presents a novel approach and insight into microalgae dewatering.
What problem does this paper attempt to address?