Abstract:The commercial, CO2-intensive, propylene generation process is challenged by a low equilibrium yield, costly separation processes, and severe carbon deposition. Oxidative dehydrogenation (ODH) of propane offers a promising alternative; however, its potential is hampered by the undesirable over-oxidation of propylene to carbon oxides. Chemical looping approaches have been used, where a metal oxide reacts with propane and/or hydrogen – instead of O2 – which can avoid over-oxidation of the hydrocarbons to carbon oxides. Oxygen can then react with the reduced solid product to regenerate it to a stoichiometric oxide. However, solid chemical looping catalysts have a low oxygen carrying capacity, often less than 1 % in order to avoid cyclic deactivation, arising from changes to the lattice structure in each cycle. Herein, we report the use of molten metals as chemical looping catalysts, where the catalyst completely reduces to metallic form and melts each half-cycle. A high oxygen capacity is possible, and melting reduces lattice strain upon reduction. Thermodynamic calculations indicate that 21 individual metal candidates could be viable, and the most promising 14 are experimentally compared. Bi-Sn had the highest conversion, and 50-50 mol% Bi-Sn was supported in a fixed-bed reactor. This resulted in 22 % propylene yield at 600 °C, compared to a 20 % yield from the reference using borosilicate beads at the same temperature. After 10 cycles with separate flows of O2 followed by C3H8, totaling 37 hours on stream, no deactivation was observed. Enhanced propylene selectivity was observed using a 50-50 mol% Bi-Sn molten mixture, surpassing the performance of Bi or Sn alone, and leading to reduced carbon oxide formation. This improved selectivity occurred with both co-fed and pre-oxidized catalysts, suggesting the creation of a unique metal oxide selectively generating propylene while minimizing overoxidation to carbon oxides. Additionally, the oxygen conversion over the Bi-Sn alloy was lower than over Bi or Sn separately when co-feeding propane and oxygen. Selectivity to cracked products was high for most of the active melts tested, especially above 550 °C.

Oxidative Dehydrogenation of Propane Using Layered Borosilicate Zeolite As the Active and Selective Catalyst

Self-evolved BOx Anchored on Mg2B2O5 Crystallites for High-Performance Oxidative Dehydrogenation of Propane

Propane Oxidative Dehydrogenation Catalyzed by Molten Metal Alloys

A high propylene productivity over B2O3/SiO2@honeycomb cordierite catalyst for oxidative dehydrogenation of propane

Ordered macroporous boron phosphate crystals as metal-free catalysts for the oxidative dehydrogenation of propane

Highly Active and Stable Co3O4 Catalyst for the Low-temperature Oxidative Dehydrogenation of Propane

O2 and CO2 assisted Oxidative Dehydrogenation of Propane using ZrO2 supported vanadium and chromium oxide catalysts

Chemically exfoliated boron nanosheets for efficient oxidative dehydrogenation of propane

Isolated boron in zeolite for oxidative dehydrogenation of propane

Finned Zn-MFI zeolite encapsulated noble metal nanoparticle catalysts for the oxidative dehydrogenation of propane with carbon dioxide

Catalysts development for O2-assisted oxidative dehydrogenation of propane to propylene

Concerted oxygen diffusion across heterogeneous oxide interfaces for intensified propane dehydrogenation

Dynamically Formed Active Sites on Liquid Boron Oxide for Selective Oxidative Dehydrogenation of Propane

Self-evolved BO anchored on Mg2B2O5 crystallites for high-performance oxidative dehydrogenation of propane

Dynamic Self-Dispersion of Aggregated Boron Clusters into Stable Oligomeric Boron Species on MFI Zeolite Nanosheets under Oxidative Dehydrogenation of Propane

Highly Effective Oxidative Dehydrogenation of Propane Over Vanadia Supported on Mesoporous SBA-15 Silica

Edge‐hydroxylated Boron Nitride for Oxidative Dehydrogenation of Propane to Propylene

CO2-mediated oxidative dehydrogenation of propane enabled by Pt-based bimetallic catalysts

Synthesis of Ordered Mesoporous Molecular Sieve-Supported Cobalt Catalyst via Organometallic Complexation for Propane Non-Oxidative Dehydrogenation

CO2 Oxidative Dehydrogenation of Propane to Olefin over Cr-M (M = Zr, La, Fe) Based Zeolite Catalyst

Strong Oxide–Support Interactions Accelerate Selective Dehydrogenation of Propane by Modulating the Surface Oxygen