Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Conversion of Cerium and Lanthanum from Rare Earth Polishing Powder Wastes to CeO2 and La0.6Ca0.4CoO3

Coordination-enhanced Extraction of Rare Earth Metals from Waste Polishing Powder and Facile Preparation of a Mesoporous Ce-La Oxide

Controlled Synthesis of Niobium and Rare Earth Mixed Oxides for Catalytic Combustion of Chlorinated Vocs in the Synthesis Process of Polyether Polyol and Polyurethane

Redox Assisted Solvent Extraction to Enable Highly Efficient Separation of Cerium from Other Lanthanides: Experimental Studies and DFT Calculations

Rare Earth Dissolution from Polishing Powder Waste in H2O2-H2SO4 System: Condition Optimization and Leaching Mechanism

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Selective Recovery of Cerium as High-Purity Oxides via Reactive Separation Using CO 2 -Responsive Structured Ligands

Complete Recovery of Rare Earths from Waste LYSO Crystals by Thermal Shock Treatment and Reinforcement Decomposition

Controlling Crystallization Pathway for Synthesizing High-Polishing Performance Spherical Cerium Oxide

Rare Earth‐Induced CoO6 Octahedral Distortion in Perovskite: An Efficient Catalytic Platform for RuO2‐Catalyzed Water Oxidation

Highly stable, mesoporous mixed lanthanum–cerium oxides with tailored structure and reducibility

Selective Extraction of Lithium and REEs from Waste Rare Earth Polishing Powder: A Two-Stage Leaching Technique

Preparation, Structure and Property of Fluorided Lanthanum Cerium Mixed Oxide

Preparation of Ceria with Large Particle Size and High Appearance Density

Preparation of Ceric Hydroxide Through Transformation of Cerium Compounds

Recovery of Rare Earth Element Cerium from Spent Automotive Exhaust Catalysts Using a Novel Method

Catalytic performance of the Ce-doped LaCoO3 perovskite nanoparticles

A new method for preparation of RE2(CO3)3 by multi-membrane electroconversion

Efficient Recovery of Rare Earth Elements from Ion-Adsorption Rare Earth Tailings: Based on the Addition of Pyrite Calcination Modification

Enhanced Thermal Stability and Oxygen Storage Capacity for CexZr1-xO2 (x = 0.4−0.6) Solid Solutions by Hydrothermally Homogenous Doping of Trivalent Rare Earths

RE (la, Nd and Yb) Doped CeO2 Abrasive Particles for Chemical Mechanical Polishing of Dielectric Materials: Experimental and Computational Analysis