Application of a combined fibrous coalescence technique in deep purification separation of composite ionic liquid alkylation reaction products

Zhaojin Lu,Ziqiang Hu,Huiqing Luo,Zhishan Bai,Bin Zhang

DOI: https://doi.org/10.1016/j.jclepro.2020.121290

IF: 11.1

2020-01-01

Journal of Cleaner Production

Abstract:Composite ionic liquid (CIL), as a novel green catalyst, has been successfully used for C4 alkylation to produce alkylate oil. However, owing to the large effluent discharge volumes (about 75000 tons per year) produced because of the difficulty in separating the CIL from emulsified reaction products in the alkylation production process, there is a requirement for a high-efficiency and rapid separation technique on an industrial scale to facilitate cleaner production. In this study, wettable and non-wettable woven fiber layers were combined to create a combined fibrous coalescer for emulsified composite ionic liquid alkylation (CILA) reaction products treatment. The laboratory research results indicated that the coalescer had the unique advantages of high separation performance and outstanding anti-blocking capability. Also, the separation efficiency could reach 99.6% at the superficial velocity of 0.5 m/min and the pressure drop across the fibrous beds was stable during the long cycle. The CIL concentration in the reaction products from the CILA industrial unit reduced from 3000 mg/L to below 20 mg/L, with a retention time of 7 min and a pressure drop of 40 KPa. The daily discharge of waste alkaline water and wastewater from the CILA industrial unit decreased by 60% and 58%, respectively, significantly reducing the volume of industrial effluent and associated environmental pollution, which are critical concerns in the treatment of CILA reaction products. In addition, these findings can facilitate further applications of CILA technology and significantly improve its environmental benefits. (C) 2020 Elsevier Ltd. All rights reserved.