Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

One Step Synthesis of Fe-SSZ-13 Zeolite by Hydrothermal Method

Direct Synthesis of SSZ-13 Zeolite Using Tetraethylammonium Hydroxide As an Efficient Organic Template in the Presence of Conventional Aluminum and Silicon Sources

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Synthesis Of Ssz-13 Zeolite With High Molar Ratio Of Sio2 To Al2o3 By Crystal Transformation Method Using Tetraethyl Ammonium Hydroxide As Template

Enhancing performance of Fe-SSZ-13 and Cu-Fe-SSZ-13 zeolites for selective catalytic reduction reaction via post-treatment method

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Synthesis of Cu-SSZ-13 from Zeolite Analcime Derived from Solid Waste and Natural Minerals for Selective Catalytic Reduction of NO

Design of Cobalt–Amine Complex As an Efficient Structure-Directing Agent for One-Pot Synthesis of Co-SSZ-13 Zeolite

Understanding the process of preparation of pure SSZ-13 via XRD and ATR-IR for selective catalytic reduction of NOx with NH3

CH4 Oxidation to Oxygenates with N2O over Iron-Containing Y Zeolites: Effect of Preparation

Transformation synthesis of aluminosilicate SSZ-39 zeolite from ZSM-5 and Beta zeolite

Efficient and rapid transformation of high silica CHA zeolite from FAU zeolite in the absence of water

Rapid synthesis and hydrothermal stability enhancement of Cu-SSZ-13 zeolites for nitrogen oxide removal

One-Pot Synthesis of Ce-SSZ-39 Zeolite with Performance in the NH 3 -SCR Reaction

Encapsulation of ultra-small Cu–Fe into ZSM-5 zeolites for NH3-SCR with broad reaction-temperature ranges

Direct Synthesis of Aluminosilicate SSZ-39 Zeolite Using Colloidal Silica as a Starting Source

Environmental benign synthesis of Nano-SSZ-13 via FAU trans-crystallization: Enhanced NH3-SCR performance on Cu-SSZ-13 with nano-size effect

Solvent-free synthesis of aluminosilicate SSZ-39 zeolite

Design and Synthesis of a Catalytically Active Cu-SSZ-13 Zeolite from a Copper-Amine Complex Template

Seed-assisted synthesis of a nanosheet-assembled hierarchical SSZ-13 zeolite by coupling a small amount of TMAdaOH with TPOAC

One-Pot Synthesis of Fe-Beta Zeolite by an Organotemplate-Free and Seed-Directed Route