Abstract:Yttrium oxide doped with europium has a great prospective for FED and PDP phosphor application. In present study, the precursor of yttrium oxide hydroxide nitrate nanorod, which was prepared via hydrothermal reaction route using PEG-6000 as template from the starting Y(NO3)(3) and KOH reactant system, was used to prepare Y2O3:Eu3+ nanorod via a post annealing process during which the precursor with adjustable shape and size was transformed to final Y2O3:Eu3+ product. XRD, field emission scanning electron microscopy (FE-SEM) and photoluminescence spectra (PL) were used to characterize the crystalline, morphology and luminescence properties of as-formed Y2O3:Eu3+ products synthesized at different post annealing temperatures, respectively. The results indicate that grain morphology of obtained Y2O3:Eu3+ product was nanorod with a mean diameter of about 40 similar to 60 nm and length of about 500 similar to 700 nm, the nanorod structure and morphology of obtained Y2O3:Eu3+ product maintained during post annealing process and the size varied slightly with different annealing temperatures. Pure cubic Y2O3:Eu3+ phase was formed and the size was the smallest at annealing treatment of 500 degrees C. Under the annealing temperature below 500 degrees C its diameter increased with increasing annealing temperature, and remained in a stable size when the annealing temperature was above 500 degrees C. The PL spectra of excitation spectra of Y2O3:Eu3+ product show that it exhibits excitation band located at about 395 and 468 nm, respectively. Above two excitation bands could be ascribed to the transition 4f-4f of Eu3+ ions in the Y2O3 host. On the other hand, the main emission peaks of the as-prepared products could be ascribed to the Eu3+ ions transition from D-5(0) to F-7(2). Furthermore, the luminescent intensity was improved about three times when the annealing temperature increased from 500 to 1000 degrees C.

Effects of Post-Annealing on Photoluminescence of Eu-doped ZnO Microsphere for Single-Component White-Light Materials

Synthetic and Effect of Annealing on the Luminescent Properties of Zno Nanowire

Enhanced Visible Light Response of ZnO Porous Thin Film by Post-Annealing Treatment

Annealing Effects on the Microstructure and Photoluminescence Properties of Ni-Doped Zno Films

ZnO:Eu thin-films: Sol–gel derivation and strong photoluminescence from 5D0→7F0 transition of Eu3+ ions

Spectroscopic Properties of Eu-doped Oxynitride Glass–ceramics for White Light LEDs

Effect of Annealing on Photoluminescence of ZnO: Al Thin Films Prepared by Sol-Gel Method

Influence of Annealing on Microstructure and Photoluminescence Properties of Al-Doped ZnO Films

Effect of rapid thermal annealing on photoluminescence and crystal structures of CdZnO films

Synthesis and Photoluminescence of Eu3+ and O2- Co-Doped ZnS Nanoparticles with Yellow Emission Synthesized by a Solid-State Reaction

Effects of Network Modifier Oxides on Luminescence Properties of Eu-Dy Co-doped White Light Emission Aluminoborosilicate Glasses

Photoluminescence and Resonant Raman Scattering in N-doped ZnO Thin Films

Preparation, photoluminescence and photocatalytic properties of ZnO:Eu3+ nanocrystals

Eu/Dy Ions Co-Doped White Light Luminescence Zinc–aluminoborosilicate Glasses for White LED

Photoluminescence enhancement of ZnO nanowire arrays by atomic layer deposition of ZrO2 layers and thermal annealing.

Engineering White Light-Emitting Eu-Doped Zno Urchins by Biopolymer-Assisted Hydrothermal Method

Full-color Photoluminescence of ZnO Nanorod Arrays Based on Annealing Processes

Strong enhancement of red photoluminescence from Eu doped Ga2O3 films by thermal annealing

Luminescence Enhancement Due to Energy Transfer in ZnO Nanoparticles and Eu3+ Ions Co-Doped Silica

Preparation And Luminescence Properties Of Y2o3 : Eu3+ Nanorods Via Post Annealing Process

Effects of Annealing on the Ferromagnetism and Photoluminescence of Cu-Doped Zno Nanowires