Abstract:The cracking behavior and mechanical properties of brittle rocks is controlled by its microstructure. In this work, an extended grain-based phase field method (GB-PFM) based on Vomnoi tessellation technology is proposed to investigate the mechanical properties and crack propagation in heterogeneous brittle rocks by considering material heterogeneities and microstructure heterogeneities at the grain scale. Then, a trial and error calibration procedure is developed after comprehensive study of uncertain parameters such as grain boundaries thickness and critical energy release rate. It is shown that greater grain boundaries thickness results in a lower tensile strength and lower Young's modulus, and greater number of intergrain cracks. Then, a group of models with single pre-existing flaw (flaw inclination angles: 0 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees) are built according to calibration parameters to study the mechanical properties and cracking behavior of heterogeneous granite under direct tension. The path of the macrocracks obtained from GB-PFM shows a more noticeable tortuous nature as compared with that results by others phase field methods. The variation of flaw inclination has an obviously influence on crack propagation. Failure patterns obtained by GB-PFM revealing the macrocracks are composed of intragrain and intergrain cracks at the microscopic view. Moreover, the stress field distribution obtained by GB-PFM is agree well with the theoretical analyses and other numerical simulations. The above simulated results prove that the GB-PFM provides an applicable numerical method for efficiently reproducing the microstructure and the related crack propagation of brittle crystalline rocks, which greatly expand the application of the phase field methods.

A Nanoscale Study of Nucleation and Propagation of Zener Types Cracks at Dislocations: Phase Field Crystal Model

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

In-situ observation of crack propagation through the nucleation of nanoscale voids in ultra-thin, freestanding Ag films

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

A Study of Strain-Driven Nucleation and Extension of Deformed Grain: Phase Field Crystal and Continuum Modeling

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film

The Jumping Dielectric Breakdown Behavior Induced by Crack Propagation in Ferroelectric Materials: A Phase Field Study

Phase‐field‐crystal study on the crack propagation behavior in a nanoscale two‐dimensional lattice in the presence of nonlinear disturbance strains

Influence of Dislocation Pile-Up on Main Crack Propagation in Nanocrystals in the Hydrogen Environment

Anomalous Toughening in Nanoscale Ferroelectrics with Polarization Vortices

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Phase Field Analysis of Crack Tip Parameters in Ferroelectric Polycrystals under Large-Scale Switching

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Crack growth on the basal plane in single crystal zinc: experiments and computations

Quantifying the Defect-Dominated Size Effect of Fracture Strain in Single Crystalline Zno Nanowires

A phase field crystal theory of the kinematics of dislocation lines

Nanoscale ductile fracture and associated atomistic mechanisms in a body-centered cubic refractory metal

Nanomechanics and Nanocomposites: Mechanical Behaviors

A thermodynamically consistent phase-field regularized cohesive fracture model with strain gradient elasticity and surface stresses

Atomistic Scale Behaviors of Crack Propagation in Nanocrystalline Bcc Iron