Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Sandwich Structured Dielectrics for Air-Stable and Flexible Low-Voltage Organic Transistors in Ultrasensitive Pressure Sensing

Polyelectrolyte Dielectrics for Flexible Low‐Voltage Organic Thin‐Film Transistors in Highly Sensitive Pressure Sensing

Solution-Processed Bilayer Dielectrics for Flexible Low-Voltage Organic Field-Effect Transistors in Pressure-Sensing Applications.

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Dielectric Interface Passivation of Polyelectrolyte-Gated Organic Field-Effect Transistors for Ultrasensitive Low-Voltage Pressure Sensors in Wearable Applications

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Construction of Sandwich-Like Porous Structure of Graphene-Coated Foam Composites for Ultrasensitive and Flexible Pressure Sensors

Ultrastable Large-Area Atomically Flat 2D Polymer Dielectric for Low-Voltage Flexible Organic Field-Effect Transistors

Editorial: High-Performance Organic Thin-Film Transistors

Ultrahigh sensitive and rapid-response self-powered flexible pressure sensor based on sandwiched piezoelectric composites

On the Working Mechanisms of Solid‐State Double‐Layer‐Dielectric‐Based Organic Field‐Effect Transistors and Their Implication for Sensors

Binary Polymer Composite Dielectrics for Flexible Low-Voltage Organic Field-Effect Transistors

Highly-stable flexible pressure sensor using piezoelectric polymer film on metal oxide TFT

Organic Charge‐Transfer Complex based Microstructure Interfaces for Solution‐Processable Organic Thin‐Film Transistors toward Multifunctional Sensing

Contact Modulated Ionic Transfer Doping in All‐Solid‐State Organic Electrochemical Transistor for Ultra‐High Sensitive Tactile Perception at Low Operating Voltage

Low-voltage organic transistors and inverters with ultra-thin fluoropolymer gate dielectric

Flexible Organic Tribotronic Transistor for Pressure and Magnetic Sensing

Sub-thermionic, ultra-high-gain organic transistors and circuits

Low-voltage operated organic thin film transistors and integrated devices with photo-cured and patterned siloxane based organic–inorganic hybrid high-k dielectrics

Enhanced piezocapacitive response in zinc oxide tetrapod–poly(dimethylsiloxane) composite dielectric layer for flexible and ultrasensitive pressure sensor

Surface engineering of high- k polymeric dielectric layers with a fluorinated organic crosslinker for use in flexible-platform electronics