Abstract:Since the available ambient power level is usually quite low for radio frequency energy harvesting, it is very desirable for an antenna to have both a high gain and a wide beamwidth. Usually, they cannot be achieved simultaneously. In order to overcome this limitation, a multi-port antenna using a nonuniform metasurface (MTS) is presented. In this MTS-based antenna, three modes with complementary radiation patterns are excited through one middle and two side aperture-coupled feeding ports. The first mode is the fundamental TM10 mode with in-phase current distributions on the MTS. It has a broadside directional radiation pattern with a high gain. The second and third modes are symmetrical to each other at a high mode. They have opposite current distri-butions on two sides of the MTS. These two modes have a directional radiation pattern with a tilted angle. These three modes share the same aperture but are excited by three different feeds. Each feed is connected to a rectifier. By combining direct current (DC) output to a single load, an antenna with a wide beam and a high gain can be effectively achieved, although each mode has the usual limitation of gain and beamwidth. The key advantage of this proposed rectenna is that the unit cells on the MTS layer can be reused to excite different MTS modes with different radiation patterns simultaneously. Thus, a wide beamwidth can be achieved. Three realized beams are oriented at - 35 degrees, 0 degrees, and + 35 degrees respectively. By combining the DC output from the three modes, the proposed rectenna has effectively achieved a beamwidth of 114 degrees with a gain ranging from 8 to 9.8 dBi. The RF-to-DC conversion efficiency of the rectifiers is 3%-67% at 2.45 GHz when the input power ranges from-35 to 0 dBm. The proposed MTS antenna with an overall size of lambda 0 x lambda 0 x 0.03 lambda 0 can achieve 12% fractional bandwidth.

Shaped Beam Rectenna With Enhanced Coverage For Indoor Rf Energy Harvesting

High-Efficiency 2-D Multibeam Rectenna Based on Gain Enhanced Patch Array

A Compact Rectenna with Flat-Top Angular Coverage for RF Energy Harvesting

A New Rectenna Using Beamwidth-Enhanced Antenna Array for RF Power Harvesting Applications

A High-Gain Rectenna Based on Grid-Array Antenna for RF Power Harvesting Applications

Design of a Closely-Spaced-element Rectenna for Low-Power Wireless Energy Harvesting

Grid-Array Rectenna with Wide Angle Coverage for Effectively Harvesting RF Energy of Low Power Density

A Dual-Polarized Omnidirectional Rectenna Array for RF Energy Harvesting

Efficiency Enhanced Seven-Band Omnidirectional Rectenna for RF Energy Harvesting

Aperture Sharing Metasurface-Based Wide-Beam Antenna for Energy Harvesting

A High-Efficiency 35 GHz Circular-Polarized Rectenna with Rotating Array

A Novel Six-Band Dual CP Rectenna Using Improved Impedance Matching Technique for Ambient RF Energy Harvesting

Rectenna Design with High Efficiency at Lower Input Power Density for Sensor Network Applications

Rectanna Design for Energy Harvesting

RF Energy Harvesting Using Multidirectional Rectennas: A Review

A High-Efficiency 35ghz Rectenna with Compact Structure for Rectenna Arrays

A High-Performance Circularly Polarized and Harmonic Rejection Rectenna for Electromagnetic Energy Harvesting

A Novel Design of Broadband Circularly Polarized Rectenna With Enhanced Gain for Energy Harvesting

A 5.8 GHz Circularly Polarized Rectenna With Harmonic Suppression and Rectenna Array for Wireless Power Transfer

Dual-Band Antenna And High Efficiency Rectifier For Rf Energy Harvesting System

Design of 2.45 GHz rectenna based on high-gain 2-element array antenna and 7-stage voltage-doubler rectifier for energy harvesting applications