Abstract:Sandwich structure is widely used in aviation field due to their high out-of-plane compression properties, shear properties, and outstanding energy absorption characteristics. During the forming process, the aluminum honeycomb will form double cell wall because of adhesive layers. The double cell wall has a great influence on the compressive properties, but there are only few researches on it. In this paper, the influence of double cell wall on the compression performance of sandwich structure was studied, and the failure process of double cell was analyzed from micro perspective. Finite element models of aluminum honeycomb and sandwich structure were established in the software ABAQUS. Moreover, the unit model including double cell wall and single cell wall was also established, and then the effectiveness of the simulation was verified by experiments. The compression experiment was carried out on the universal test machine with sandwich structure and the test speed was set as 2 mm/min. The results show that the failure occurs from one end when the aluminum honeycomb faces with flat compression load alone, while the failure of the sandwich structure starts from the middle of the core. The adhesive layer in the double cell wall is subjected to both compressive stress and tensile stress, and the failure occurs first in tension position. Then, the effects of double cell wall different bonding parameters and different panel layering angles on the compressive properties of the structure were studied. The results show that the structural compression performance increases slowly after the bonding length reaches 4 mm, and the bonding thickness less than 0.1 mm has little influence on the compression performance. The fiber orientation of the panel close to the core can be designed to be 90° which is parallel to the double cell wall, which can effectively improve the flat compression performance.

Influence of the Geometric Parameters on the Densification Onset Strain of Double-Walled Honeycomb Aluminum under Out-of-Plane Compression

Initial Densification Strain Point’s Determination of Honeycomb Structure Subjected to Out-of-plane Compression

Effects of Shape and Scale of a Honeycomb of Sandwich Panels on Structural Rigidity Under Thermal Load

In-Plane Impact Properties of Aluminum Double-Walled Honeycomb Cores

Experimental Assessment on Energy Absorption Property of Aluminum Honeycomb under Out-of-plane Compression

Metallic tube-reinforced aluminum honeycombs: Compressive and bending performances

Numerical and Experimental Investigation of Static Four-point Bending Response of Honeycomb Sandwich Structure: Failure Modes and the Effect of Structural Parameters

ELASTIC MODULI AND MATERIAL EFFICIENCY OF ALUMINUM HONEYCOMB CORES

Investigation on the Temperature Dependent Out-of-plane Quasi-Static Compressive Behavior of Metallic Honeycombs

Mean Out-of-plane Dynamic Plateau Stresses of Hexagonal Honeycomb Cores under Impact Loadings

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Enhanced Out-of-plane Compressive Strength and Energy Absorption of 3D Printed Square and Hexagonal Honeycombs with Variable-Thickness Cell Edges

Experimental Analyses on Energy Absorption Property of Aluminum Honeycomb under Out-of-Plane Compression

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

Experimental study on out-of-plane mechanical and energy absorption properties of combined hexagonal aluminum honeycombs under dynamic impact

Out-of-Plane Mechanical Properties and Thickness Matching Optimization Between Rib and Cell Thin-Wall of Reinforced Regular Hexagon Aluminum Honeycomb

Out-of-Plane Compression Behaviour of Aluminum Alloy Large-Scale Super-Stub Honeycomb Cellular Structures

Analysis of Honeycomb and Sandwich Structure Compression Property and the Damage of Double Cell Wall

Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure

Theoretical and Numerical Analyses on Mechanical Performance of Octagonal Honeycomb Structures Subjected to Out-of-plane Compression

Nonlinear Constitutive Relations of Thin-Walled Honeycomb Structure