Abstract:The quasi-static crushing behavior of aluminum honeycomb materials is thoroughly evaluated using a combined experimental, analytical, and numerical approach. Based on experimental characterization, the constitutive properties of the honeycomb cores under flat-wise compression are approximated by an elastic perfectly plastic material with inclusion of hardening after densification. Two different cell size materials are tested and compared, and the effect of strain rate on the crushing stress is studied. The experimental results show that the crushing platen stress is directly related to the relative density of core materials, and it can be associated with the strain rate, even though the effect of strain rates is not so dominant based on the conducted quasi-static tests. A simple physical model for predicting the crushing wave length and stress is proposed and compared with the experimental data and available formulas in the literature. It is observed that the crushing wave length is close to the cell size and related to the geometric dimension and strain rate. The folding mechanism is also measured by the ARAMIS system (a photogrammetry technique), and the measured von Mises strains are compared with the numerical results from LS-DYNA, demonstrating that the folding mechanism is initiated by two plastic hinge lines formed at the cell corners. Multilayer effect is also investigated, and it indicates that including the second layer slightly decreases the maximal crushing stress, but the simple superposition is still applicable for crushing multilayer honeycomb cores with different density. Partial crushing due to small size cylindrical indenter is further studied, and the experiment shows that the partial crushing process can be described by an elastic—plastic hardening material. Side impact process of honeycomb materials is also investigated, and the collapse band and its propagation process are captured. The thorough characterization of core crushing behavior conducted in this study provides better understanding of the failure process of honeycomb materials and can be further employed to study energy absorption and impact response of sandwich structures.

Investigation on the Temperature Dependent Out-of-plane Quasi-Static Compressive Behavior of Metallic Honeycombs

Metallic tube-reinforced aluminum honeycombs: Compressive and bending performances

Effects of Shape and Scale of a Honeycomb of Sandwich Panels on Structural Rigidity Under Thermal Load

Experimental Assessment on Energy Absorption Property of Aluminum Honeycomb under Out-of-plane Compression

ELASTIC MODULI AND MATERIAL EFFICIENCY OF ALUMINUM HONEYCOMB CORES

Theoretical Modeling and Mechanical Characterization at Increasing Temperatures under Compressive Loads of Al Core and Honeycomb Sandwich

Strain Rate Effect on the Out-of-plane Dynamic Compressive Behavior of Metallic Honeycombs: Experiment and Theory

Numerical and Experimental Investigation of Static Four-point Bending Response of Honeycomb Sandwich Structure: Failure Modes and the Effect of Structural Parameters

Experimental Analyses on Energy Absorption Property of Aluminum Honeycomb under Out-of-Plane Compression

A Study on Out-Of-Plane Compressive Properties of Metal Honeycombs by Numerical Simulation

Theoretical and Numerical Analyses on Mechanical Performance of Octagonal Honeycomb Structures Subjected to Out-of-plane Compression

Influence of the Geometric Parameters on the Densification Onset Strain of Double-Walled Honeycomb Aluminum under Out-of-Plane Compression

Inserting Stress Analysis of Combined Hexagonal Aluminum Honeycombs

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

Analysis and optimisation of parameters influencing the out-of-plane energy absorption of an aluminium honeycomb

Research on the Mean Plastic Crushing Stress of Hexagonal Aluminum Honeycombs under Out-of-Plane Compression

The study of honeycomb material dynamic mechanical properties which under out-plane impact load

Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb

In-plane Compression Behavior of Hybrid Honeycomb Metastructures: Theoretical and Experimental Studies

Numerical and theoretical analysis of honeycomb structure filled with circular aluminum tubes subjected to axial compression

Impact Enhancement of the Out‐of‐plane Behaviour of Honeycombs