Abstract:Based on grain size effect of ceramics and boundary effect model, the concept of relative size is introduced. In addition, meso-fracture model of ceramics with different relative sizes is established. Experimental data of nine ceramic materials with different relative sizes are statistically analyzed. It is found that fictitious crack growth length Δa fic is k (W − a 0) (where k is a constant, W is the specimen depth, and a 0 is the initial crack length). Furthermore, k value is 0.02 when relative size is less than 200, while it is 0.2 when relative size is in the range from 200 to 1500. Fracture parameter values determined by considering relative size are basically consistent with fracture parameter values reported in the literature. Combined with normal distribution, full fracture failure curves of ceramics with different relative sizes are constructed. No brittle failure controlled by fracture toughness occurs in ceramic specimens with relative size less than 200, while brittle failure controlled by fracture toughness occurs in ceramic specimens with relative size ranging from 200 to 1500. Main reasons for the occurrence of brittle failure controlled by fracture toughness are that with increasing relative size, grain size is reduced, the number of grain boundaries increases, crack growth length increases gradually, and the interaction between fracture process zone of ceramics and the boundary of specimens becomes stronger. At the same time, an expression for predicting the peak load P max of ceramics with relative size ( W – a 0 ) / d av ≤ 1500 is established. It is found that peak load can be predicted based on relative size and geometric parameters of ceramics, which is of great significance for conveniently and accurately obtaining fracture parameters of ceramics.

Notch Radius Effect on Fracture Toughness of Ceramics Pertinent to Grain Size

Accurate measurement of fracture toughness in structural ceramics

Prediction of Ceramic Fracture with Normal Distribution Pertinent to Grain Size

Failure criterion for brittle materials with U‐notches: Unification of characteristic length‐based and grain size‐based criteria

Reliable evaluation of fracture toughness in ceramics via nanosecond laser notching method

Effect of Notch Depth on Fracture Toughness of Y-Tzp and Determination of Its Actual Value

Effect of notch depth on fracture toughness of zirconia ceramics tested by SEVNB method

Fracture model of meso-ceramics based on relative size and prediction of fracture toughness and bending strength

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Influence of Notch Geometry on the Rock Fracture Toughness Measurement Using the ISRM Suggested Semi-Circular Bend (SCB) Method

Probability distribution of notch strength of ceramics - (II) prediction of probability distribution of notch strength

SEVNB Method on Fracture Toughness of Ceramic

Probabilistic Relation Between Stress Intensity and Fracture Toughness in Ceramics

Determination of Fracture Toughness of Zirconia Ceramics with Different Yttria Concentrations by SEVNB Method

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

Influence of Grain Size on Granite Strength and Toughness with Reliability Specified by Normal Distribution

Assessment of Fracture Toughness Using Small Punch Tests of Prenotched Specimens

Effect of Pore Size on Strength and Fracture Toughness of Zirconia Ceramics

The Effect of Groove and Notch Tip Angles on Testing Fracture Toughness by SEVNB Method: Models and Experimental Validation

Evaluations on Ceramic Fracture Toughness Measurement by Edge Chipping

A New Method for the Preparation of Ultra-Sharp V-notches to Measure Fracture Toughness in Ceramics