Abstract:A direct synthesis procedure is presented for the design of transmission line low-/high-pass filters with series stubs. The proposed prototype consists of a cascade of series stubs of electrical length theta(c) alternating with uniform transmission lines of electrical length 2 theta(c). An exact network synthesis technique is applied on the fully frequency-distributed transmission line filter structures. By short-circuiting these series stubs, a low-pass prototype can be established to synthesise the filters with both predictable in-band and out-of-band behaviours. Instead, if the series stubs are open-circuited, a quasi-high-pass or wide band-pass filter can be designed with specified frequency bandwidth and centre frequency. Based on the formulation of a transfer function, a set of closed-form design formula is derived so that the synthesis design can be carried out for the proposed filters with Chebyshev equal-ripple frequency responses in the concerned low-and high-pass bands. As design examples, two five-pole planar filters based on the low-and high-pass topologies are implemented by using hybrid slotline and coplanar-waveguide structures. After final optimisation is executed via full-wave electromagnetic software to take all the discontinuities into accounts, two designed filters are fabricated and measured to verify the proposed synthesis approach and confirm the theoretical predictions.

Design Procedure of a Microstrip Filter Facilitated by Lumped-Element Equivalent Circuit Representation

Compact Third-Order Microstrip Bandpass Filter Designed By The Distributed- To Lumped-Element Equivalence

Novel Microstrip Lowpass Filter Using Stepped Impedance Resonator And Spurline Resonator

A Novel Microstrip Filter Using Three-Mode Stepped Impedance Resonator (TSIR)

Compact Microstrip Filter with Third-Order Quasi-Elliptic Bandpass Response

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

Design of compact dual-band semi-lumped mixed bandpass filter

A Novel Microstrip Bandpass Filter

Miniaturized Microstrip Lowpass Filter Using Asymmetric Stepped-Impedance Hairpin Resonator and Slotted Ground Plane

Equivalent Circuit Model of Lumped Elements Retrieved from Measured S-Parameters of Microstrip Line in Frequency Range 0.5-5Ghz

Accurate modeling of a patterned ground and its application to microwave filters

A Sequentially Coupled Filter Design Approach Using the Reflected Group Delay Method and the Implicit Space Mapping Technique

Miniaturised microstrip bandpass filter using octagonal hairpin resonators with side-coupled technique

Compact Microstrip BPF with High Selectivity Using Extended Tapped Lines

A design method for microstrip pseudocombline filter

Compact Microstrip Bandpass Filter Using Two‐layer Aperture‐coupled Resonator‐embedded Structure

A Lumped Element Filtering Rat-Race Coupler on Self-Packaged SISL Platform

Design of a Compact Dual‐mode Patch Resonator Band‐pass Filter

Direct Synthesis of Transmission Line Low-/ High-Pass Filters with Series Stubs

Compact microstrip bandpass filter based on hybrid half-and quarter-wavelength resonators

A Novel Microstrip Band-Pass Filter Based On Hole Coupling Structure