Abstract:As a promising replacement for nitride red phosphors, Ce: Y3(Mg1.8Al1.4Si1.8)O12(Ce: YMASG) ceramic phosphors have attracted significant attention recently for their advantages in inorganic encapsulation and massive red‐shifting of Ce3+ emission. In this work, Ce: YMASG with different doping concentrations of Ce3+ and Al2O3, was fabricated by vacuum sintering to investigate its effects on the elimination of the impurity phase and the enhancement of the luminescent properties of white light‐emitting diodes (w‐LEDs). It was discovered that the emission wavelength redshifts from 592 nm to 606 nm as the Ce3+ concentration increases, while at 450 K, the emission intensity deteriorates from 0.47 to 0.36 of its initial value. The Rietveld analysis revealed the presence of an impurity phase of Y4MgSi3O13 with a concentration of 17.021 wt% in Ce: YMASG. With the introduction of Al2O3, the impurity phase was eliminated from the matrix completely, the emission peak shifted to a shorter wavelength, and the thermal stability was greatly improved. When the correlated color temperature was controlled at around 3000 K in the packaged w‐LEDs, the commission international de l'éclairage (CIE) chromaticity coordinates shifted toward the bottom left corner of the diagram with increasing concentration of Ce3+. Conversely, the luminous efficiency (LE) increased from 36 lm/W to 58.6 lm/W as the concentration of Al2O3 increased from 0 to 10 wt%, which demonstrated the application prospect of the fabricated phosphor in warm w‐LEDs.

Spectral Photoluminescence Properties of YAG: Ce, R (R: Gd3+, Pr3+, Gd3+ and Pr3+) Transparent Fluorescent Thin Film Prepared by Pulse Laser Deposition

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Cr 3+ ions improving the spectral properties of YAG: Ce 3+ luminescent ceramics for white LD lighting

Growth and characteristics of Ce3+ ions-doped YAG single-crystal optical fibers for LED white light sources

Charge deformation and orbital hybridization: intrinsic mechanisms on tunable chromaticity of Y3Al5O12:Ce3+ luminescence by doping Gd3+ for warm white LEDs

Spectrum Regulation of Yag:Ce Transparent Ceramics with Pr, Cr Doping for White Light Emitting Diodes Application

Red-emitting YAG: Ce, Mn transparent ceramics for warm WLEDs application

Energy transfer and thermal stability enhancement in Ce/Cr co-doped Al 2 O 3 /YAG eutectic phosphor ceramics for broadband red-emission

Massive Red-Shifting of Ce3+ Emission by Mg2+ and Si4+ Doping of YAG:Ce Transparent Ceramic Phosphors

Tunable luminescence Y3Al5O12:0.06Ce 3+, xMn2+ phosphors with different charge compensators for warm white light emitting diodes

(Sr, Ca)AlSiN3:Eu2+ Phosphor-Doped YAG:Ce3+ Transparent Ceramics as Novel Green-Light-Emitting Materials for White LEDs

Structural and Optical Properties of Ce 3+ , Yb 3+ Co-doped YAG Films by Pulsed Laser Deposition

The effect of Lu3+ doping upon YAG:Ce phosphor ceramics for high-power white LEDs

Sm3+/Pr3+ biactivated Ca3Y2Ge3O12:0.04Sm3+:Pr3+ red phosphor with high thermal stability for low correlated temperature WLED

The application YAG:Ce3+@SiO2 phosphor for improving color deviation of phosphor-converted light-emitting diode

Facile fabrication of Eu3+ activated YAG:Ce3+ glass ceramics exhibiting high thermal stability and tunable luminescence for warm white LEDs

Red Emission Generation in Ce3+/Mn2+ Co-Doping Y3Al5O12 Phosphor Ceramics for Warm White Lighting Emitting Diodes

Optimization of Ce 3+ concentration and Y 4 MgSi 3 O 13 phase in Mg 2+ ‐Si 4+ Co‐doped Ce: YAG ceramic phosphors

High-efficiency YAG:Ce3+ glass-ceramic phosphor by an organic-free screen-printing technique for high-power WLEDs

The role of co-dopant Ce 3+ on the spectral properties of Dy 3+ activated YAG single crystal for yellow green laser application

Improving the CRI of Al2O3-YAG:Ce eutectic for high-power white LEDs applications: Energy-transfer and co-luminescence